Where can I get a Winfield Carburetor rebuild kit? Barry Bowyers?

[Bob C]

Did a search and I think the email is now different but the home phone
and address listed in the link to Vince's site are the same.

Bob

[Banger Neil]

I can't get a reply on the email. I'll have to call, remembering I'm in the UK so I don't call in the middle of the night.

In fact, now is a good time...

[Fred A]

I bought a half dozen gasket sets at Turlock from Barry. The fathers day show I also bought another half dozen rebuild sets, also from Barry. Seems that he goes to the big meets out west. Talked to him about the Big Three in San Diego this month, also a plan to attend and bring some Winfield stuff. He should bring some beautifully restored carbs. Not cheap in that condition. The phone numbers on Vince's sight still correct. Good Luck: Fred A

[Banger Neil]

Thanks guys, just called but no reply. I'll try again a little later.

[Juggler]

Originally Posted by Banger Neil

Thanks guys, just called but no reply. I'll try again a little later.

If you get any joy Neil, I'll be at the Qualcomm meet at the end of Feb

Cheers

Juggs

[Banger Neil]

Sponsored Links (Register now to hide all advertisements)

Nice one Juggs. I'm struggling to get hold of Barry, much like I did last time around.

[waxhead]

After struggling for a long time to get in contact with Barry, I ended up buying an SR carb kit from Brauns Automotive. It wont be cheap, but if you really need one, contact them and they should have one in stock. Good luck

http://www.braunsautomotive.com/winf...arburetors.asp

24660 Narbonne Ave.
Lomita, CA 90717
Office (310) 325-4303
Fax (310) 325-4303
[email protected]

[Banger Neil]

Thanks for tip Waxhead, but Juggler has come up trumps for me.

[quickchange]

I have 5 new still in their plastic bag Winfield S & SR with pump diaphragm plus instruction ex Barry Bowyer Listed some years ago at $35 a kit , Can freight or deliver too Pate swap meet In April ,2023,

[johnneilson]

The kit for the SR carburetor also includes the diaphragm and spring, valve springs, and phenolic valve discs in addition to the gasket set. Cost is $53.00 plus $7.00 shipping per order. If you want to order a rebuild kit, contact: Barry Bowyer 2509 Valencia Ave Santa Ana, California 92706 (714) 972-1911 home (714) 745-7444 cell

[4bangerbob]

Another option is a fellow that makes the kits, you must specify either for the a-bb sizes or c to d size. email contact is [email protected] his kit includes base gaskets, float chamber gasket, fuel inlet housing gasket, throttle body to float chamber gasket, accelerator pump diaphragm

[Dan McEachern]

Barry's home number above has been disconnected. The cell number went to message and the mail box is full so..... John- have you talked to Barry recently??

[johnneilson]

Originally Posted by Dan McEachern

Barry's home number above has been disconnected. The cell number went to message and the mail box is full so..... John- have you talked to Barry recently??

Dan, no, not communicated for a while.
I may be down that way next week, I'll see if anyone is around.

John