Issues on installing hood latch on my 1951 F-1 truck

[toms32]

It seems like I am missing a spring or some thing on my 51 ford truck. Can some one send me some photo's on how it is installed or how their truck is set up thanks Tom

[big job]

I'll try my best (my scanner took a dump) hopefully you have the large threaded bullet
that has a slot for screwdriver a cupped large washer placed on that then a large spring
on that the whole thing is screwed into the hood and adjusted so the hood closes correctly.
then a lock nut is placed on the top. hope this helps

LMC truck in stock sam

[Ross F-1]

Sponsored Links (Register now to hide all advertisements)

There's a small spring that returns the release handle, and the big spring on the latching post. Google the numbers to see if you can find them.