The Ford Barn

Flathead · 09-05-2012, 12:25 PM

Is there a source to get my old dash panel re-plated with correct finish. It is a 1930 Tudor round speedo. Thanks

BRENT in 10-uh-C · 09-05-2012, 12:34 PM

Craig Riker in Toledo is my choice. 419-290-4442 or e-mail him.

Big John · 09-05-2012, 12:44 PM

Craig does very nice work,,,show quality...

Great Lakes Greg · 09-05-2012, 05:34 PM

I'm with everybody else. Killer job in the correct butler finish.

peters180a/170b · 09-05-2012, 05:58 PM

Pauls Chrome...Penn. but you must talk to Rick.... He will be at Hershey .look him up and drop it off or ask for a price on the part.. Not cheap but you will know you have enough Nickle , or chrome on your parts... triple plating.

Flathead · 09-05-2012, 11:08 PM

Sponsored Links (Register now to hide all advertisements)

Thanks for the good info!!

Kevin in NJ · 09-06-2012, 05:52 AM

Pauls was the shop that ruined some of my Cabriolet parts. My triple hinges came back such that they would not fit together. They ground the top irons down and looked like swords. This after I called the lead guy 3 times and sent them 8 pages of basic directions like how the hinges needed to fit together so they could work.

After sending parts back twice and paying thousands of dollars I have rare parts that do not look right and sort of fit together.

09-05-2012, 12:25 PM	#1
Flathead Senior Member Join Date: May 2010 Location: Southern Maine Posts: 1,497	Dash panel re-plated in nickle Is there a source to get my old dash panel re-plated with correct finish. It is a 1930 Tudor round speedo. Thanks

09-05-2012, 12:34 PM	#2
BRENT in 10-uh-C Senior Member Join Date: May 2010 Location: Eastern Tennessee Posts: 11,508	Re: Dash panel re-plated in nickle Craig Riker in Toledo is my choice. 419-290-4442 or e-mail him. __________________ . BRENT in 10-uh-C . www.model-a-ford.com ...(...Finally Updated!! ) .

09-05-2012, 12:44 PM	#3
Big John Senior Member Join Date: May 2010 Posts: 416	Re: Dash panel re-plated in nickle Craig does very nice work,,,show quality...

09-05-2012, 05:34 PM	#4
Great Lakes Greg Senior Member Join Date: May 2010 Posts: 1,369	Re: Dash panel re-plated in nickle I'm with everybody else. Killer job in the correct butler finish.

09-05-2012, 05:58 PM	#5
peters180a/170b Senior Member Join Date: May 2010 Location: Putnam Valley N.Y. Posts: 2,151	Re: Dash panel re-plated in nickle Pauls Chrome...Penn. but you must talk to Rick.... He will be at Hershey .look him up and drop it off or ask for a price on the part.. Not cheap but you will know you have enough Nickle , or chrome on your parts... triple plating.

09-05-2012, 11:08 PM	#6
Flathead Senior Member Join Date: May 2010 Location: Southern Maine Posts: 1,497	Re: Dash panel re-plated in nickle Sponsored Links (Register now to hide all advertisements) Thanks for the good info!!

09-06-2012, 05:52 AM	#7
Kevin in NJ Senior Member Join Date: May 2010 Location: South East NJ Posts: 3,398	Re: Dash panel re-plated in nickle Pauls was the shop that ruined some of my Cabriolet parts. My triple hinges came back such that they would not fit together. They ground the top irons down and looked like swords. This after I called the lead guy 3 times and sent them 8 pages of basic directions like how the hinges needed to fit together so they could work. After sending parts back twice and paying thousands of dollars I have rare parts that do not look right and sort of fit together.