The Ford Barn

JoeMarine · 09-29-2013, 01:45 PM

I'm trying to connect the horn to the "wire harness" and I have a yellow and blue wire with yellow stripes. Which wire goes where IRT hooking up to the horn. Thanks in advance.

Tom Wesenberg · 09-30-2013, 12:37 AM

Sponsored Links (Register now to hide all advertisements)

It doesn't matter which wire go to which terminal.
The wire terminals plug in from the ends of the clips, so the terminals will be pointing at each other.

09-29-2013, 01:45 PM	#1
JoeMarine Senior Member Join Date: Aug 2013 Location: Stafford, VA Posts: 115	Model a horn I'm trying to connect the horn to the "wire harness" and I have a yellow and blue wire with yellow stripes. Which wire goes where IRT hooking up to the horn. Thanks in advance.

09-30-2013, 12:37 AM	#2
Tom Wesenberg Senior Member Join Date: May 2010 Location: Mpls, MN Posts: 27,582	Re: Model a horn Sponsored Links (Register now to hide all advertisements) It doesn't matter which wire go to which terminal. The wire terminals plug in from the ends of the clips, so the terminals will be pointing at each other.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode