|
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
![]() |
Thread Tools | Display Modes |
![]() |
#1 |
Member
Join Date: Jul 2014
Posts: 40
|
![]()
I found papa nick in the swap meet section that he rebuilds speedometers. Sent him mine and get it back in a timely manner but it sat until I finished my rebuild on my 31tudorr. When I first drove it was off 9mph based on my gps. I have emailed him several times without a response.
Does anyone know if he is still in business? |
![]() |
![]() |
![]() |
#2 |
Member
Join Date: Feb 2015
Location: Quakertown, PA
Posts: 61
|
![]()
Try this email; jrnichols642@yahoo.com
|
![]() |
![]() |
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
#3 |
Senior Member
Join Date: May 2010
Location: So Cal
Posts: 7,206
|
![]()
Looks like he hasn't posted in about a month.
|
![]() |
![]() |
![]() |
#4 | |
Senior Member
Join Date: Sep 2019
Location: Pigeon Forge, Tennessee
Posts: 958
|
![]() Quote:
|
|
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: May 2010
Location: Lakewood, CA
Posts: 1,262
|
![]()
Is it possible that you have the wrong gear on the drive shaft?
|
![]() |
![]() |
![]() |
#6 |
Senior Member
Join Date: Jun 2014
Location: Melbourne, Australia
Posts: 5,397
|
![]() Sponsored Links (Register now to hide all advertisements)
You didn't say whether your speedo was reading high or low so I can't say whether you need more or less teeth on the drive gear. If it is reading slow, you need 2 less teeth. If it is reading fast, 2 less. If you change the gear, be careful to put the new one on facing the same way as the old one was.
__________________
Yesterday is History. Tomorrow is a mystery. Enjoy Today. |
![]() |
![]() |
![]() |
#7 |
Member
Join Date: Jul 2014
Posts: 40
|
![]()
Syncho909 had a good suggestion, I will try it. On the question if was accurate before I bought it as project and never had drove it.
|
![]() |
![]() |
![]() |
#8 |
Member
Join Date: Dec 2016
Location: Middletown, NY
Posts: 79
|
![]()
Changing the gear is a good idea as mentioned above. On a measured course my speedometer was 5.4% low with a 19 tooth gear. I purchased an 18 tooth gear from one of the vendors and now my speedometer/odometer is spot-on. Rationale is that with one less gear a full revolution is a little faster. Since yours is 9% off a two gear change should make it perfect or almost perfect. The repair is easy, just two bolts. When ordering the gear also order the gasket and lube the gear when installing. Good luck! G.D.
|
![]() |
![]() |
![]() |
#9 | |
Senior Member
Join Date: May 2010
Posts: 1,291
|
![]() Quote:
- He's still active on eBay. |
|
![]() |
![]() |
![]() |
#10 |
Senior Member
Join Date: May 2010
Location: Long Island, NY
Posts: 2,042
|
![]()
GPS has a significant error. Try driving past a radar speed sign in a school zone.
__________________
Bob Bidonde |
![]() |
![]() |
![]() |
#11 |
Senior Member
Join Date: Feb 2015
Location: Australia
Posts: 1,466
|
![]()
Both GPS and radar need a constant speed over a significant period of time to be accurate.
|
![]() |
![]() |
![]() |
#12 |
Senior Member
Join Date: Sep 2019
Location: Pigeon Forge, Tennessee
Posts: 958
|
![]()
I agree. Put two in the same car and you’ll see that they usually will disagree with one another ! At best It’s a guesstimate.
Last edited by McMimmcs; 08-28-2020 at 03:50 PM. |
![]() |
![]() |
![]() |
#13 |
Senior Member
Join Date: May 2010
Location: 215 E. 6th Street Northport, Michigan 49670
Posts: 586
|
![]()
The comment about radar needing a significant period of time to register is wrong.
__________________
Bob from Northport Northport, Michigan |
![]() |
![]() |
![]() |
#14 |
Senior Member
Join Date: Mar 2012
Location: gouverneur n,y,
Posts: 2,443
|
![]()
Hi yes I'm still rebuilding the speedometers just let me know what you need. papanick
jrnichols642@yahoo.com |
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|