Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 08-11-2019, 11:41 PM   #1
DannL
Senior Member
 
DannL's Avatar
 
Join Date: Jul 2019
Location: Oklahoma City, OK
Posts: 184
Default Removing wiper arm . .

Sponsored Links (Register now to hide all advertisements)
I've got a 6volt made in Japan wiper motor on the inside of the cab. The motor shaft goes through a hole in the top of the window frame, as I suspect most do. And then there's the wiper arm. Would like to pull the whole assembly but the arm won't budge. Looking for ideas. I pryed around with an angled pick where the arm attaches to the shaft. Couldn't feel any clasps or tabs. Many thanks in advance.
DannL is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 05:51 PM.