|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
11-29-2020, 11:06 AM | #1 |
Senior Member
Join Date: Aug 2020
Location: Sagle, Idaho
Posts: 359
|
About spark plug gap
Just got my first Model A and am enjoying working on it. I ordered new spark plugs (W-18) and set the gap at .035". This got me wondering about spark plug gap. I am very experienced (shade tree style) at working on my five Ford 8N tractors (1947-1951), and have changed many plugs in them They have the Ford 4 cylinder engine and their plug gap is .025-.028, quite smaller than the A's .035. For those of you who understand Ford 4 cylinder engines better than me, why would there be such a large difference in plug gap for the A. All the W-18s came with a gap of about .025. Why the difference in gap needs? The tractors are also 6V positive ground.
|
11-29-2020, 11:16 AM | #2 |
Senior Member
Join Date: May 2010
Location: Largo Florida
Posts: 7,225
|
Re: About spark plug gap
Its all about available voltage. The old tractors should be able to handle the wider gap. And I think Ford was still trying to figure things out back then.
A wider gap allows for better/smoother low speed operation, but, is more susceptible to high speed missfire. |
Sponsored Links (Register now to hide all advertisements) |
|
11-29-2020, 11:42 AM | #3 |
Senior Member
Join Date: May 2010
Location: Long Island, NY
Posts: 3,432
|
Re: About spark plug gap
The spark plug gap is set on the basis of:
> The amount of hi-voltage available to jump the gaps in the distributor & spark plugs; > Volumetric efficiency of the engine's intake system; > Compression ratio; > Combustion flame development in the cylinders; > Density of the fuel in the cylinders; > Power the engine makes. A rule of thumb is that the more power an engine makes, the smaller the smaller the total gap needs to be (rotor to distributor + spark [plug gap).
__________________
Bob Bidonde |
11-29-2020, 12:12 PM | #4 | |
Senior Member
Join Date: Aug 2012
Posts: 875
|
Re: About spark plug gap
Quote:
__________________
The Master Cylinder Enjoying life at the beach in SoCal... |
|
11-29-2020, 12:22 PM | #5 |
Senior Member
Join Date: May 2010
Location: Portland OR
Posts: 6,339
|
Re: About spark plug gap
The gap maybe larger then you think. Add in the .025 at the distributor and makes it about the same as my S10 4 cylinder, around .060.
__________________
I know the voices aren't real but damn they have some good ideas! |
11-29-2020, 01:56 PM | #6 |
Senior Member
Join Date: Aug 2020
Location: Sagle, Idaho
Posts: 359
|
Re: About spark plug gap
Sponsored Links (Register now to hide all advertisements)
|
11-29-2020, 03:26 PM | #7 | |
Senior Member
Join Date: May 2010
Location: now Kuna, Idaho
Posts: 3,774
|
Re: About spark plug gap
Quote:
Well, not really. It's the larger gap that determines the voltage needed to fire the plug. The larger the gap (and the higher the compression pressure), the more voltage required. So the spark jumps that .025" rotor gap like it wasn't even there. Thus all the coil sees is the .035" plug gap. |
|
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|