Where to find door latch screws

[bill3337]

I'm looking for the screws that hold the door latch assembly into the door. These are the ones that hold the latch to the door edge. They are something like 10-28, I have 10-32 but that's too fine and the factory screws have a slightly oval head and are countersunk. I've tried Bob Drake, Macs etc, but no one seems to list those screws. I'd take them in steel or stainless steel. Thanks, Bill

[johnboy34]

The ones on my 34 are 10-24 and 12-24. Have you tried Roy?
http://www.fordscript.com/
or maybe a place like this,
http://www.classicfasteners.com.au/r...-24-unc-x-1-2/

[willowbilly3]

I get most of that stuff at Fastenall. They do not have the tapered star washers Ford like to use but I found a whole assortment of them the Ford garage threw out.

[Randy in ca]

What year and model? Could make a difference.

[bill3337]

The screws are for a '37 Ford Tudor. The Roy's site has an incredible selection of screws, but none for the door to door latch mechanism. They are a short screw oval countersunk head 10-24. I'll try Fastenal on Monday, we have one of those here.

[swoopNZ]

Sponsored Links (Register now to hide all advertisements)

I have some.
email me if you have no luck in locating them.

[email protected]

[cas3]

model A stuff is common, cheap, and alot of it interchanges. sounds like the same door screws, or maybe dash screws. check brattons web site, i believe the sizes are listed with the part. restoration supply also has lots to choose from

[bill3337]

I did end up finding some of the correct size (12-24 x 1/2" through Fastenal) Thanks for the replies.