1930 running board re-cover help?

[CWPASADENA]

Hi Folks,

I am to the point where I am ready to re-cover the running baords on my '30. Is there information out there somewhere that would assist me in winding up witha first class job?

I did a search and did not find anything. Any help would be appreciated.

Thanks in advance,

Chris

[hardtimes]

Originally Posted by CWPASADENA

Hi Folks,

I am to the point where I am ready to re-cover the running baords on my '30. Is there information out there somewhere that would assist me in winding up witha first class job?

I did a search and did not find anything. Any help would be appreciated.

Thanks in advance,

Chris

chris,
there was a discussion, onthe subject, just a week or more ago!
someone advised that youd better get it glued right the first try...or else after following that thread, i decided that one might not get a good job done with one handed,so will leave em bare metal

[Geo. H]

I did mine with new mats from Snyders about two years ago. It may not be first class, but it looks good to me.

[Mike V. Florida]

Try looking here;

https://fordbarn.com/forum/showthread.php?t=32453

[glenn in camino]

Sponsored Links (Register now to hide all advertisements)

Use solvent base contact cement, not the water base stuff.