Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 05-23-2010, 11:17 PM   #1
kevinanderson
Junior Member
 
Join Date: May 2010
Posts: 28
Default 50lb oil pressure sender

i read somewhere that a willys unit was a better than one advertised in the ford catalogs. is this true? can't find that web site. can someone point me in that direction. Have a SW mechanical unit, but want the original one to work too. thanks
kevinanderson is offline   Reply With Quote
Old 05-23-2010, 11:31 PM   #2
34fivewindow
Senior Member
 
34fivewindow's Avatar
 
Join Date: May 2010
Location: Santa Rosa, Calif.
Posts: 376
Default Re: 50lb oil pressure sender

Quote:
Originally Posted by kevinanderson View Post
i read somewhere that a willys unit was a better than one advertised in the ford catalogs. is this true? can't find that web site. can someone point me in that direction. Have a SW mechanical unit, but want the original one to work too. thanks
Here is the Standard Brand 50lb sending unit part # PS-60, this will replace the stock ford 50lb sending unit, you can get this at NAPA parts stores......Ed
34fivewindow is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 05-23-2010, 11:56 PM   #3
Mike in AZ
Senior Member
 
Mike in AZ's Avatar
 
Join Date: May 2010
Location: Waddell, AZ
Posts: 2,540
Default Re: 50lb oil pressure sender

Sponsored Links (Register now to hide all advertisements)
you can try kaiserwillys.com...they show the sender in their catalog....Mike
Mike in AZ is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 02:36 PM.