Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 04-09-2020, 02:12 PM   #1
BRENT in 10-uh-C
Senior Member
 
BRENT in 10-uh-C's Avatar
 
Join Date: May 2010
Location: Eastern Tennessee
Posts: 11,486
Default Does anyone have a print on A-7522-B Trunnion??

Sponsored Links (Register now to hide all advertisements)
Since Benson is closed for awhile, does anyone have a copy of the A-7522-B print that could give me an exact O.D. of the Trunnion?

The A-7520 Clutch Pedal print calls for the Trunnion hole to be reamed to 0.6240 - 0.6255, so I am needing to know what the spec is supposed to be on the Trunnion. I am whether to fabricate a run of O/S Trunnions where we can ream the Clutch Pedal to oversize to take up the wear/slack the Pedal Trunnion holes instead of welding up the hole and redrilling.

TIA
__________________
.

BRENT in 10-uh-C
.
www.model-a-ford.com
...(...Finally Updated!! )

.
BRENT in 10-uh-C is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 03:20 PM.