|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
04-27-2020, 10:03 PM | #1 |
Senior Member
Join Date: Nov 2011
Location: Ivyland, PA
Posts: 116
|
Which starter plate and why?
Can anyone explain the correct application of which starter plate to use with a cast iron or stamped steel bell housing when doing a later flathead conversion in an early car and why it makes a difference??
Thanks, Steve |
04-27-2020, 10:23 PM | #2 |
Senior Member
Join Date: May 2010
Location: Coral Springs FL
Posts: 10,936
|
Re: Which starter plate and why?
I know there is a thread somewhere showing all the different starter plates and what they fit. If you do a Fordbarn search of Starter Plates" you will find tons of info.
Takes a little time to read but , well worth it. Star here and keep going. https://www.fordbarn.com/forum/searc...rchid=15346680 Read all the info. here also. https://www.jalopyjournal.com/forum/...&o=relevance&c[node]=5 Here's more info. https://www.google.com/search?ei=laO...V0KDv8Q4dUDCAw The reason it's so very important to get the correct matching starter plate and bellhousing is because some starter plate are made so that the starter has a slight tilt and some do not. Also, it must be correct for proper engagement with the flywheel. And, finally, the bellhousing must have the same bolt pattern as your transmission. For instance, a 1949 to early 1951 Mercury bellhousing and starter plate will bolt right up to the 1939-48 Ford transmission. Be aware that the 8RT starter plate is cast and larger to accomodate the 11 inch clutch. It will also accomodate the 10 in. clutch. The 1949-51 Mercury starter plates must be installed using the matching stamped steel bellhousings and will accomodate the 10 in. clutch. What are you trying to do? Be specific and help will arrive. Last edited by 19Fordy; 04-27-2020 at 10:35 PM. |
Sponsored Links (Register now to hide all advertisements) |
|
04-27-2020, 10:27 PM | #3 |
Senior Member
Join Date: May 2010
Location: Mn
Posts: 2,411
|
Re: Which starter plate and why?
Here's a link to Vanpelts for bell housing/starter plate info.
http://www.vanpeltsales.com/FH_web/f...s-adapters.htm .
__________________
If mama ain't happy, ain't nobody happy. But if daddy ain't happy...RUN |
04-28-2020, 08:26 AM | #4 | |
Senior Member
Join Date: May 2010
Location: Near Rising Sun, Maryland
Posts: 10,858
|
Re: Which starter plate and why?
Quote:
https://web.archive.org/web/20160318...n/flathead.htm Once you open the above main file, go to: 49 - 53 Bellhousing Compatable ID Also, for those unfamiliar with this techno source file, there is literally Ream's of other valuable information there, so, I think it would be wise to bookmark this main file for future reference.
__________________
John "Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein Last edited by JM 35 Sedan; 04-28-2020 at 08:55 AM. |
|
04-28-2020, 08:39 AM | #5 |
Senior Member
Join Date: Jun 2010
Location: Perry OH
Posts: 1,330
|
Re: Which starter plate and why?
Basically the starter plate mates to the oil pan and keeps the dirt out. The Only one that I know of is the 49 , 51 Ford car that is slanted. JMHO
Last edited by jimvette59; 04-28-2020 at 11:23 AM. |
04-28-2020, 10:49 AM | #6 | |
Senior Member
Join Date: May 2010
Location: East Shore of LAKE HOUSTON
Posts: 11,108
|
Re: Which starter plate and why?
Sponsored Links (Register now to hide all advertisements)
Quote:
The dark one is the '48-'52 cast iron Ford pick-up half-bell. The red one is the '49 thru early '51 stamped steel Mercury half-bell. You can run an 11" clutch with the cast-iron bell if necessary. DD …………………. |
|
04-28-2020, 10:56 AM | #7 |
Senior Member
Join Date: May 2010
Location: Coral Springs FL
Posts: 10,936
|
Re: Which starter plate and why?
V8 hit the nail on the head. I have used the 49-51 Merc stamped steel bell housing and starter plate on both 1949-53 Ford and Merc engines to adapt them to 1939-48 Ford transmissions. Keep in mind that in 1951 Mercury changed to another style bell housing half way thru the model year that won't fit.
|
04-28-2020, 11:27 AM | #8 |
Senior Member
Join Date: Nov 2011
Location: Ivyland, PA
Posts: 116
|
Re: Which starter plate and why?
Thanks guys, great info and links, answered my question completely and then some!! Steve
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|