The Ford Barn

RickMcK · 01-26-2022, 11:26 AM

I'm looking for a after market muffler for my 36 pick up. I don't want to pay $350, for a Ford script reproduction. Does anyone know if there is a generic one that will interface with the existing stock exhaust system?

Sent from my LM-V405 using Tapatalk

Kube · 01-26-2022, 04:35 PM

Quote:

Originally Posted by RickMcK

I'm looking for a after market muffler for my 36 pick up. I don't want to pay $350, for a Ford script reproduction. Does anyone know if there is a generic one that will interface with the existing stock exhaust system?

Sent from my LM-V405 using Tapatalk

Rick, If you have the old muffler, take it to NAPA. Ask for a counter person that can think beyond a computer screen. There are books there that depict every muffler they sell. Each has every dimension listed.
There are also after-market places that can supply you. Waldron's comes to mind.

Clem Clement · 01-26-2022, 04:52 PM

Walker made one for my 40 merc. I got it from the Fordbarn wanted site.

36coupe · 01-26-2022, 08:32 PM

You can also search muffler on Rock Auto and pick a muffler by inlet size from 1.65” to 4”

51504bat · 01-26-2022, 09:41 PM

No old time muffler shops in Seattle? Should be easy peasy for them to adapt one for your p/u.

Rodrelic · 01-26-2022, 09:47 PM

Sponsored Links (Register now to hide all advertisements)

I got mine from tractor supply, by dimension. I used 2

alanwoodieman · 01-26-2022, 10:35 PM

tractor supply~!!!

Adam/Mill Valley CA · 01-26-2022, 11:14 PM

I used a Walker 18179 on my otherwise stock '36 pickup exhaust system (stock 221 cu in poured bearing motor), went on with minimal fiddling (cut a little bit off the tailpipe side to just leave a straight stub, and cut off a small unused bracket) -cost about $45

Adam

RickMcK · 01-27-2022, 09:35 AM

Adam. Thanks for the walker part #. I will verify the input and output pipe diameters and order one, if it's correct, otherwise I will make a trip to NAPA.

Sent from my LM-V405 using Tapatalk

Don Rogers · 01-27-2022, 09:56 AM

Rick, This drawing of original muffler might help you.

RickMcK · 01-27-2022, 10:34 AM

Quote:

Originally Posted by Don Rogers

Rick, This drawing of original muffler might help you.

Sent from my LM-V405 using Tapatalk
Don. thank you. This is exactly what I need to talk to the folks at NAPA.

Sent from my LM-V405 using Tapatalk

01-26-2022, 11:26 AM	#1
RickMcK Member Join Date: Sep 2013 Location: Seattle, WA, USA Posts: 78	36 PU-After market muffler? I'm looking for a after market muffler for my 36 pick up. I don't want to pay $350, for a Ford script reproduction. Does anyone know if there is a generic one that will interface with the existing stock exhaust system? Sent from my LM-V405 using Tapatalk __________________ Thanks Rick McKenney Seattle WA

01-26-2022, 04:52 PM	#3
Clem Clement Senior Member Join Date: May 2010 Location: Fairfax, VA Posts: 3,393	Re: 36 PU-After market muffler? Walker made one for my 40 merc. I got it from the Fordbarn wanted site.

01-26-2022, 08:32 PM	#4
36coupe Senior Member Join Date: Oct 2012 Location: Eastcoast Posts: 863	Re: 36 PU-After market muffler? You can also search muffler on Rock Auto and pick a muffler by inlet size from 1.65” to 4”

01-26-2022, 09:41 PM	#5
51504bat Senior Member Join Date: Sep 2013 Location: SoCal-Redlands Posts: 3,013	Re: 36 PU-After market muffler? No old time muffler shops in Seattle? Should be easy peasy for them to adapt one for your p/u. __________________ Making the simple complicated for over 30 years.

01-26-2022, 09:47 PM	#6
Rodrelic Senior Member Join Date: Mar 2018 Location: Florida panhandle Posts: 194	Re: 36 PU-After market muffler? Sponsored Links (Register now to hide all advertisements) I got mine from tractor supply, by dimension. I used 2

01-26-2022, 10:35 PM	#7
alanwoodieman Senior Member Join Date: May 2010 Location: upstate SC Posts: 2,963	Re: 36 PU-After market muffler? tractor supply~!!!

01-26-2022, 11:14 PM	#8
Adam/Mill Valley CA Senior Member Join Date: May 2010 Location: Mill Valley,CA Posts: 275	Re: 36 PU-After market muffler? I used a Walker 18179 on my otherwise stock '36 pickup exhaust system (stock 221 cu in poured bearing motor), went on with minimal fiddling (cut a little bit off the tailpipe side to just leave a straight stub, and cut off a small unused bracket) -cost about $45 Adam __________________ 1936 pickup, stock, black 1965 Mustang coupe 289/4bbl, black/red 1971 Alfa Romeo GTV 1750 coupe, dark red/tan 1970 911E 2.2 litre dark blue/black 1968 BMW R50/2 US, black (m'cycle) 1967 Triumph TR6R , sea foam/cream (m'cycle) 2022 Royal Enfield Interceptor 650 red (m'cycle) 1974 Honda CB750 red (m'cycle) 2000 Kawasaki W650 blue/silver (m'cycle)

01-27-2022, 09:35 AM	#9
RickMcK Member Join Date: Sep 2013 Location: Seattle, WA, USA Posts: 78	Re: 36 PU-After market muffler? Adam. Thanks for the walker part #. I will verify the input and output pipe diameters and order one, if it's correct, otherwise I will make a trip to NAPA. Sent from my LM-V405 using Tapatalk __________________ Thanks Rick McKenney Seattle WA