|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
12-04-2022, 08:44 PM | #1 |
Junior Member
Join Date: Oct 2022
Location: Christiansburg, VA
Posts: 15
|
Losing power when warmed up
I have a 1929 CCPU Model A and it runs fine when cold, and even when its warmed up before stopping. However, when it is warmed up and I come to a stop or turn off the engine and start it back up, it loses all power (almost feels like it is running out of gas ... no backfiring though). I talked with another member in the local Model A club, and they said they had similar issues and it was the coil (when stopped the heat of the engine compartment would heat up the coil and cause issues). So, I swapped out the coil with the one from my 1930 coupe but it didn't resolve the issue. Has anyone else experienced similar problems with their A's losing power when warmed up after coming to a stop? Any insights would be greatly appreciate.
|
12-04-2022, 08:53 PM | #2 |
Senior Member
Join Date: May 2012
Location: Chillicothe, Missouri
Posts: 1,182
|
Re: Losing power when warmed up
I've been there before typically it's a condenser secondly it can be a coil I would try another condenser
__________________
"If I asked people what they wanted they would have said faster horses." -Henry Ford "Primitive technology is not a design flaw" 1928 Ford Model A Roadster Pickup 1930 Gordon Smith Air Compressor 1941 Willy's Pickup 1960 Thunderbird-For Sale 1964 Buick Riviera 2x4 425 1965 Pontiac GTO, 455 Super Duty 2004 Dodge Ram SRT-10, V-10 Viper 1977 Charger Jet Boat,460 Ford,Jacuzzi Jet Front Engine Nostalgia Dragster,Supercharged 296 "Fullrace Flathead" Ford Engine Build up on DVD ask |
Sponsored Links (Register now to hide all advertisements) |
|
12-05-2022, 08:15 AM | #3 |
Junior Member
Join Date: Oct 2022
Location: Christiansburg, VA
Posts: 15
|
Re: Losing power when warmed up
|
12-05-2022, 09:36 AM | #4 |
Senior Member
Join Date: May 2010
Location: Grafton,OHIO
Posts: 728
|
Re: Losing power when warmed up
go to napa and get one no wait on shipping and freight
|
12-05-2022, 01:36 PM | #5 |
Senior Member
Join Date: May 2010
Location: Stuart Florida
Posts: 149
|
Re: Losing power when warmed up
Stalling at a stop could be the carburetor flooding due to the fuel level to high in the bowl. If the carburetor is flooding, shut of the fuel just before you come to a stop. If you shut off a idling engine and it refuses to start do the same. Try starting with the fuel shut off after it gets started turn the fuel on. If it still stalls out go as stated above
|
12-05-2022, 02:38 PM | #6 |
Senior Member
Join Date: Dec 2013
Location: Waxahachie, Texas
Posts: 951
|
Re: Losing power when warmed up
Sponsored Links (Register now to hide all advertisements)
If I understand you correctly, you're saying that after the car reaches normal operating temperature after driving for a while and then dies when you come to a stop, the car will restart but will not continue to run acceptably? What exactly do you mean by losing power? |
12-05-2022, 04:47 PM | #7 | |
Junior Member
Join Date: Oct 2022
Location: Christiansburg, VA
Posts: 15
|
Re: Losing power when warmed up
Quote:
|
|
12-05-2022, 04:57 PM | #8 | |
Junior Member
Join Date: Oct 2022
Location: Christiansburg, VA
Posts: 15
|
Re: Losing power when warmed up
Quote:
|
|
12-05-2022, 04:57 PM | #9 |
Junior Member
Join Date: Oct 2022
Location: Christiansburg, VA
Posts: 15
|
Re: Losing power when warmed up
|
12-05-2022, 05:02 PM | #10 |
Senior Member
Join Date: Jan 2021
Location: Waynesboro Va.
Posts: 216
|
Re: Losing power when warmed up
Fisher auto parts or Napa either one usually has condensors on the shelf. As was said above, no wait or shipping costs. I would get an extra and keep in each car.
|
12-05-2022, 05:03 PM | #11 |
Senior Member
Join Date: May 2010
Location: So Cal
Posts: 8,760
|
Re: Losing power when warmed up
What gear are you in when you are going 10mph ?
|
12-05-2022, 05:15 PM | #12 |
Junior Member
Join Date: Oct 2022
Location: Christiansburg, VA
Posts: 15
|
Re: Losing power when warmed up
I have a Tremec T170 transmission in the '29 truck (4 speed with a sycronized clutch). 2nd gear on this transmission will get you going faster than 2nd gear on the originial transmission (I have an original transmission in my '30 coupe). So, when the truck is having this issue, it would struggle to go 10 mph in either 2nd or 3rd gear - it might actually stall if I put it in 3rd gear.
|
12-05-2022, 05:17 PM | #13 |
Senior Member
Join Date: Aug 2011
Location: Eagle Bend, MN
Posts: 2,026
|
Re: Losing power when warmed up
Check point gap.
__________________
"There are some that can destroy an anvil with a teaspoon and shouldn't be allowed to touch anything resembling a tool." |
12-05-2022, 05:27 PM | #14 |
Senior Member
Join Date: Dec 2013
Location: Waxahachie, Texas
Posts: 951
|
Re: Losing power when warmed up
What carburetor are you using? Has it always had this issue? Did it ever run right before without having this problem?
|
12-05-2022, 05:38 PM | #15 |
Junior Member
Join Date: Oct 2022
Location: Christiansburg, VA
Posts: 15
|
Re: Losing power when warmed up
It has a Zenith carburetor (I assume the original one, although it might have been rebuilt sometime in its past). I've only owned the truck for a few months, and when I first got it I noticed that it struggled getting up some of the hilly roads around where I live. So, I had a Model A mechanic from the local club put a high compression head on it (as well as some other things). I've driven it a lot more since I got it back with the new head. So, the only thing I can compare it to is my '30 coupe, which has a Tillotson carburetor on it - no issues at all getting up the hills or losing power after a long tough drive. I originally thought it might be a carburetor issue until another member in the local Model A club mentioned he had similar issues and it was the coil.
|
12-05-2022, 06:09 PM | #16 |
Senior Member
Join Date: Dec 2013
Location: Waxahachie, Texas
Posts: 951
|
Re: Losing power when warmed up
Does it start easily when you first crank it up to go for a drive?
Does it run good, pull hills, etc. until you have to stop or slow down for traffic? As eagle said...check the point gap for sure and while you're at it, check the timing and maybe have your mechanic friend check the timing gear to see if it might have jumped time. It's possible that the coil might be faulty, so replace it with a known good one. Condensers are a common failure item - cheap and easy to replace. Buy a good one like one of the "no burnout types" from Bratton's, Snyder's, etc. |
12-05-2022, 06:14 PM | #17 |
Senior Member
Join Date: Jan 2018
Location: Wellington, New Zealand
Posts: 117
|
Re: Losing power when warmed up
Hey,
What about fuel evaporating in the fuel line?? Is that a thing with the Model A's?? I seem to recall some talk about that a while ago.. It would make sense to me if you are pushing it hard on the mountain roads and the fuel sitting in the fuel line close to the exhaust.. If you stop or just idle, the fuel will sit in that hot spot a lot longer than open throttle.. Just a thought.. |
12-05-2022, 06:51 PM | #18 |
Senior Member
Join Date: Dec 2013
Location: Waxahachie, Texas
Posts: 951
|
Re: Losing power when warmed up
Yes, we call it "vapor lock" and it can be a problem if the fuel line is situated too close to the exhaust manifold. It happens a lot down here in Texas, especially in our HOT summers It could certainly be contributing to his problem.
|
12-05-2022, 07:07 PM | #19 |
Senior Member
Join Date: Feb 2011
Location: Lincoln, Nebraska
Posts: 1,912
|
Re: Losing power when warmed up
Since you have the 30 Coupe that is running well and if a new condenser doesn't help try using the carburetor and distributor on the pickup. One at a time.
Another thing comes to mind is it possible you have an issue in the muffler that is causing back pressure when it heats up?
__________________
Dave / Lincoln Nebraska |
12-06-2022, 08:23 AM | #20 |
Junior Member
Join Date: Oct 2022
Location: Christiansburg, VA
Posts: 15
|
Re: Losing power when warmed up
|
12-06-2022, 08:26 AM | #21 | |
Junior Member
Join Date: Oct 2022
Location: Christiansburg, VA
Posts: 15
|
Re: Losing power when warmed up
Quote:
|
|
12-06-2022, 08:28 AM | #22 | |
Junior Member
Join Date: Oct 2022
Location: Christiansburg, VA
Posts: 15
|
Re: Losing power when warmed up
Quote:
|
|
Sponsored Links (Register now to hide all advertisements) |
|
12-06-2022, 08:30 AM | #23 |
Senior Member
Join Date: Jan 2019
Location: Florida Panhandle
Posts: 587
|
Re: Losing power when warmed up
If everything else checks out might check for insufficient valve lash (if equipped with adjustable lifters). Interesting problem, please share the fix.
|
12-06-2022, 08:32 AM | #24 | |
Junior Member
Join Date: Oct 2022
Location: Christiansburg, VA
Posts: 15
|
Re: Losing power when warmed up
Quote:
|
|
12-06-2022, 09:19 AM | #25 |
Junior Member
Join Date: Oct 2022
Location: Christiansburg, VA
Posts: 15
|
Re: Losing power when warmed up
Thanks. I'm going to start by changing the condenser (I really hope this is the problem because it is an easy fix). I will move on to the other recommendations, to include yours, if the condenser isn't the issue. I will keep you updated.
|
12-06-2022, 10:50 AM | #26 |
Senior Member
Join Date: Jun 2015
Location: Red Deer, Alberta
Posts: 5,047
|
Re: Losing power when warmed up
Sponsored Links (Register now to hide all advertisements)
Have you tried cleaning the carburetor? Checking the jets?
__________________
If you don't hear a rumor by 10 AM, start one!. Got my education out behind the barn! |
12-06-2022, 11:22 AM | #27 |
Junior Member
Join Date: Oct 2022
Location: Christiansburg, VA
Posts: 15
|
Re: Losing power when warmed up
I actually tried this and openned the GAV a full turn, and even quickly pulled out and released the choke. Both of these provided minimal improvement, so something else is the issue. When I had the high compression head put on recently, the mechanic took apart the carburetor and cleaned it - he said it looked good and didn't need to be rebuilt. However, the carburetor does leak after shutting down the engine, even with the gas flow valve shut. It stops leaking after a short while. So, there is likely an issue with one of the jets, but I'm not sure this is causing the loss of power issue that I described (but certainly something I plan to fix).
|
12-06-2022, 03:03 PM | #28 |
Senior Member
Join Date: Apr 2021
Location: Central Illinois
Posts: 498
|
Re: Losing power when warmed up
I recently worked through a problem where a car lost power above 30 mph. It was not heat dependent, but you might check your spark plugs and their gaskets for a leak when the engine gets hot. They should be torqued to 25 foot pounds.
One of the plugs was leaking. It had a light oil streak around it. No backfire on it either. Unusual spark issues are sometimes created by faulty ground connections, bad cables and wires with broken strands internally or at their ends where connected to ring terminals. Voltage drop testing will identify faults. Voltage drop testing of the Model A electrical system is described in Les Andrew second blue book "Diagnosis and TroubleShooting". Too large of a voltage drop can weaken the spark at the plugs. I suggest starting at the battery. Charge it. Clean the + cable to the frame to bare metal and tighten, then the clamps at both battery posts. Then the connection at the starter switch. If you have a safety fuse, clean it and its clips. Move up to the terminal box and the coil posts. Make sure all connections are tight. Good luck. Please report back what is found.
__________________
"It ain't what you know for certain that gets ya in trouble. It's what ya know for certain that just ain't so!" Last edited by Rob Doe; 12-06-2022 at 03:10 PM. |
12-06-2022, 04:56 PM | #29 | |
Junior Member
Join Date: Oct 2022
Location: Christiansburg, VA
Posts: 15
|
Re: Losing power when warmed up
Quote:
|
|
07-25-2023, 10:22 AM | #30 |
Junior Member
Join Date: Oct 2022
Location: Christiansburg, VA
Posts: 15
|
Re: Losing power when warmed up
Update: I have followed a lot of the recommendations in response to my initial post and from friends in the local Model A club:
1. Changed the coil: A friend in the local Model A club mentioned that he had a similar problem and when the engine compartment heated up the coil internal expanded and caused a break in one of the internal coils. This didn't fix my problem, but when I took the old coil off, it started leaking. So, replacing it was a good thing. 2. Set the timing and points gap: Multiple people recommended setting the timing and the points gap. I did these, but they did not fix my loss of power issue. These were easy to do, so a good step in trying to fix my problem. 3. Rebuild the carb: I had a Zenith carb on the truck and pulled it off and replaced it will a Tillotson that I had rebuilt. This fixed my problem to some extent, but not completely. I rebuilt the Zenith and put it back on. However, when I reinstalled the Zenith carb, I also installed a phenolic spacer between the carb and the intake manifold. This spacer reduces the heat transfer from the intake manifold to the carb. These prevented the loss of power issue, but I started having severe overheating issues on hot days. 4. Had my radiator re-cored: To fix the overheating issue, I had my radiator re-cored. This fixed the issue. Although the flow tubes in the old core weren't in terrible shape, there was some blockage the restricted the flow to some extent - even after back-flushing the radiator. So, the loss of power issue was really an overheating issue. The truck never fully overheated (coolant boiling) because when the engine got hot, it cause the gas in the carb to boil first. This resulted in the engine losing power because it wasn't getting gas. When I switched out the Zenith for a Tillotson, the Tillotson was better at dissipating the heat from the engine and prevented the gas from boiling to some extent (the Tillotson is made from pot metal and the Zenith is cast iron). When I put in the phenolic spacer between the intake manifold and the carb, it prevented the gas in the carb from boiling and allowed the engine to continue to run (no loss of power). However, this allowed the engine to continue to heat up and the coolant would boil - severe overheating. Having the radiator re-cored (and back flushing the cooling channels on the engine) has now fixed the overheating issue. I also removed the license plate from in front of the radiator to the bumper and use a mix of Watterwetter and Sierra antifreeze as coolant. Watterwetter provides a better heat transfer from the engine to the coolant and the antifreeze has a higher boiling temperature than straight water. |
07-25-2023, 12:17 PM | #31 |
Member
Join Date: Sep 2011
Location: Powell Siding (near Cleveland), MO
Posts: 82
|
Re: Losing power when warmed up
Great detective work, and understanding what was going on helps all of us when you thoroughly explain each cause and effect.
|
07-25-2023, 01:19 PM | #32 |
Senior Member
Join Date: Apr 2021
Location: Central Illinois
Posts: 498
|
Re: Losing power when warmed up
A recent similar problem at our local club was: a single spark plug that was not torqued when installed. 25 foot lbs with a torque wrench and the problem was gone.
__________________
"It ain't what you know for certain that gets ya in trouble. It's what ya know for certain that just ain't so!" |
|
|
Sponsored Links (Register now to hide all advertisements) |
|