|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
08-31-2015, 11:08 PM | #1 |
Member
Join Date: Apr 2015
Location: Whitsundays, Queensland, Australia.
Posts: 38
|
Door striker plate 37 Coupe
My 1937 5 widow Coup'e has door striker plate attachment captive nuts with .850" between centres. The only replacement door striker plates available from Dennis Carpenter have attachment holes with .750" between centres. Does any one know where I can purchase 2 off striker plates with .850" between centres ?
|
09-01-2015, 08:59 PM | #2 |
MEMBER EMERITUS
Join Date: May 2010
Location: New Zealand
Posts: 1,380
|
Re: Door striker plate 37 Coupe
Have a look at Drakes selection from earlier years.
I'm pretty sure one of them will fit. |
Sponsored Links (Register now to hide all advertisements) |
|
09-01-2015, 09:11 PM | #3 |
Senior Member
Join Date: May 2010
Location: Waddell, AZ
Posts: 2,540
|
Re: Door striker plate 37 Coupe
welcome to the "Barn...got pics of your '37?....Mike
|
09-03-2015, 05:58 AM | #4 |
Member
Join Date: Apr 2015
Location: Whitsundays, Queensland, Australia.
Posts: 38
|
Re: Door striker plate 37 Coupe
Thank you swoopNZ for your help,I have written Bob Drake to confirm their 1933/34 strike plates have the .850" distance between hole centre lines that I require. My 37 coupe is ex NZ, I brought it to Australia in 1990 after buying it in NZ in 1975. It has not been road regrestered since 1964. Restoration is now underway while I try to remember where the various parts of it come from. Buying a basket case is very expensive and challenging not to be recommended unless you have deep pockets and a lot of spare time and resolve to finish the project.
Thank you. |
10-06-2015, 12:44 AM | #5 |
Member
Join Date: Apr 2015
Location: Whitsundays, Queensland, Australia.
Posts: 38
|
Re: Door striker plate 37 Coupe
Door strker plate part number 40-702340 marked 1932-1934 Closed Car from Bob Drake fits my 1937 New Zealand assembled 5 window coup'e. They have .840" between screw holes. Thank you swoopNZ for the lead.
|
02-11-2016, 05:14 PM | #6 |
Senior Member
Join Date: Dec 2012
Location: Wheaton, IL near Chicago
Posts: 861
|
Re: Door striker plate 37 Coupe
Sponsored Links (Register now to hide all advertisements)
I got some stainless striker plates in a box of misc parts I bought off a member a couple years ago. Went to install them today and find out the holes don't line up. Thanks to this thread, now I know why. stainless for my 36 pickup are temporarily discontinued, so I ordered a pair of the cast iron ones. Thank you again FordBarn, for posting the question and the helpful answers that were posted. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|