|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
10-01-2010, 08:38 PM | #1 |
Senior Member
Join Date: May 2010
Location: Torrington, CT
Posts: 609
|
Custom Banger Header and intakes
City:
Torrington
State:
ct
Price:
in add
Hi every one... I wont to use this thread to post pics of custom intakes and headers I have made.
If you are looking for parts to make your own or wont me to make you a custom intake or header please PM me thanks for look-in Bill Laser cut model A-B header 3/8 thick flanges 1.5 Ex. port 1.375IN. port and 1.625 Ex. 1.500 In. or I can make any size 3/8 Steel Header flange $60 each 3/8 Stainless Steel Header flange $118 cut custom size ports to your size ADD $10 3/8 intake steel flanges $25 pair 3/8 intake stainless steel flanges $45 pair 3 bolt carb flanges $30 for one $50 for two If you don't see it just ask The last Intake I made... Thank Brent Last edited by BCCHOPIT; 08-10-2011 at 08:27 PM. Reason: ADD PIC |
10-08-2010, 03:09 PM | #2 |
Senior Member
Join Date: May 2010
Location: Torrington, CT
Posts: 609
|
Re: Custom Banger Header and intakes
I had some guys on the HAMB ask if I could make some intake flanges that work with the stock Ex.. So I will be making a small batch of flanges If any one wont's some please PM me the more I make the cheaper the price will be.
Thanks Bill |
Sponsored Links (Register now to hide all advertisements) |
|
10-08-2010, 09:33 PM | #3 |
Senior Member
Join Date: May 2010
Location: Tyler,TX
Posts: 462
|
Re: Custom Banger Header and intakes
I would be a player for a single carb intake for Model A.I like your work!Will your intake work with a stock A exhaust manifold? James
|
10-09-2010, 09:52 PM | #4 | |
Senior Member
Join Date: May 2010
Location: Torrington, CT
Posts: 609
|
Re: Custom Banger Header and intakes
Quote:
Thanks and yes... I have two flanges one for the stock Ex. and one for the header |
|
10-09-2010, 10:26 PM | #5 |
BANNED
Join Date: May 2010
Posts: 61
|
Re: Custom Banger Header and intakes
looking for a four into 1 header with flange and bolt on collector ready to use,have any done? how much,thanks Billy
|
10-12-2010, 10:05 PM | #6 |
Senior Member
Join Date: May 2010
Location: Torrington, CT
Posts: 609
|
Re: Custom Banger Header and intakes
Sponsored Links (Register now to hide all advertisements)
|
11-02-2010, 06:42 PM | #7 |
Senior Member
Join Date: May 2010
Location: Torrington, CT
Posts: 609
|
Re: Custom Banger Header and intakes
Btt
|
11-26-2010, 04:11 AM | #8 |
Senior Member
Join Date: Sep 2010
Posts: 271
|
Re: Custom Banger Header and intakes
how much do you want for the intake or the exhaust flanges ? how much do you need for the intake manifolds ? carl 763 274 8634
|
11-26-2010, 08:13 AM | #9 | |
Senior Member
Join Date: May 2010
Location: Torrington, CT
Posts: 609
|
Re: Custom Banger Header and intakes
Quote:
PRICES are on the first post Laser cut model A-B header 3/8 thick flanges 1.5 Ex. port 1.375IN. port and 1.625 Ex. 1.500 In. or I can make any size 3/8 Steel Header flange $60 each 3/8 Stainless Steel Header flange $118 cut custom size ports to your size ADD $10 3/8 intake steel flanges $25 pair 3/8 intake stainless steel flanges $45 pair 3 bolt carb flanges $30 for one $50 for two If you don't see it just ask INTAKES are $240 and up Last edited by BCCHOPIT; 08-10-2011 at 08:30 PM. |
|
12-04-2010, 09:29 PM | #10 |
Senior Member
Join Date: May 2010
Location: Torrington, CT
Posts: 609
|
Re: Custom Banger Header and intakes
I have been selling parts in kit form
header & intake kit $110 just the intake kit $50 Last edited by BCCHOPIT; 08-10-2011 at 08:34 PM. |
12-22-2010, 12:22 AM | #11 |
Member
Join Date: Oct 2010
Location: Alpine, Utah
Posts: 44
|
Re: Custom Banger Header and intakes
HELLO, please let me know price of a 2 stromberg manifold for a model b banger.
I will be using the snyder's split cast exhaust so i can split the pipes at the manifold. Larry Argenian, 801-756-5620,, [email protected]. thanks, Larry |
12-23-2010, 07:34 AM | #12 |
Senior Member
Join Date: May 2010
Location: Torrington, CT
Posts: 609
|
Re: Custom Banger Header and intakes
What style - log - set up like Brents but with twin carbs. I am thinking you will need 3/4 flanges.
Thanks Bill Last edited by BCCHOPIT; 01-03-2011 at 10:38 PM. |
01-03-2011, 10:42 PM | #13 |
Senior Member
Join Date: May 2010
Location: Torrington, CT
Posts: 609
|
Re: Custom Banger Header and intakes
|
02-14-2011, 11:22 PM | #14 |
Senior Member
Join Date: May 2010
Location: Torrington, CT
Posts: 609
|
Re: Custom Banger Header and intakes
I was asked to make some cheaper thick flanges that work with the stock EX.
steel $45 a pair As always if you don't cant find it just ask thanks Bill |
02-22-2011, 11:50 PM | #15 |
Senior Member
Join Date: May 2010
Location: Torrington, CT
Posts: 609
|
Re: Custom Banger Header and intakes
one more for the list
|
02-23-2011, 10:07 PM | #16 |
Member
Join Date: May 2010
Posts: 56
|
Re: Custom Banger Header and intakes
I am interested in the linkage set up shown in the picture with your custom intake manifold. Can you give me some idea of the cost. I have an old intake manifold that does not have a boss on the side for linkage. I need to come up with some idea and your picture looks like a possible solution. Dick
|
02-23-2011, 10:25 PM | #17 |
Senior Member
Join Date: May 2010
Location: Torrington, CT
Posts: 609
|
Re: Custom Banger Header and intakes
Can you send me a pic of your set up? You can PM me or Email [email protected]
thanks Bill |
02-24-2011, 09:05 AM | #18 |
Senior Member
Join Date: May 2010
Location: Liberty, KY
Posts: 901
|
Re: Custom Banger Header and intakes
You do nice work!!!! Dale
|
02-24-2011, 04:17 PM | #19 |
Junior Member
Join Date: Jul 2010
Location: Poultney Vermont
Posts: 15
|
Re: Custom Banger Header and intakes
Hi, Nice work. I noticed the intake with the separate runners, and I was wondering what size runners you use and how well it works on the model a engine? I have been thinking along these lines for a model t project I am doing as this seems to be the best way to keep the vaccuum signal more stable. What would you charge for an intake such as this?.....Thanks, John M.
|
02-25-2011, 10:08 AM | #20 |
Member
Join Date: May 2010
Posts: 67
|
Re: Custom Banger Header and intakes
I would be interested in adding these to my products, ? check out modelaonly.com] we have a lot of model a hot rodders out here in calif. also would you be interested in laser cutting other small bkts i use?
|
02-25-2011, 07:21 PM | #21 | |
Senior Member
Join Date: May 2010
Location: Torrington, CT
Posts: 609
|
Re: Custom Banger Header and intakes
Quote:
I have been on you web page before I like the tiny tach. We will have to talk I will PM you my number Last edited by BCCHOPIT; 02-26-2011 at 10:10 AM. |
|
03-24-2011, 09:29 PM | #22 |
Senior Member
Join Date: May 2010
Location: Torrington, CT
Posts: 609
|
Re: Custom Banger Header and intakes
Brent just got the intake and water inlet back from Nickel |
Sponsored Links (Register now to hide all advertisements) |
|
05-15-2011, 09:34 PM | #23 |
Senior Member
Join Date: May 2010
Location: Torrington, CT
Posts: 609
|
Re: Custom Banger Header and intakes
still needs a little more work but here is the new header for my car
|
05-15-2011, 10:03 PM | #24 |
Senior Member
Join Date: May 2010
Location: MN
Posts: 7,053
|
Re: Custom Banger Header and intakes
Nice stuff dude.
|
08-14-2011, 10:26 PM | #25 |
Senior Member
Join Date: May 2010
Location: Torrington, CT
Posts: 609
|
Re: Custom Banger Header and intakes
I am proud to say I will be working with Matt @ Gear Drive. LAKEHEADER .com Making some banger intakes to go with his very nice lake headers. We have been talking for some time now and this is the 1st of hopefully many intakes.
This one will bolt to his header he made for a guy that now wants to add a intake to his header. Most will have the intake and lake header all on one flange. __________________ Custom Banger Header & Intake Custom Gasser Straight Axles PM ME FOR MORE INFO |
09-01-2011, 06:30 AM | #26 |
Senior Member
Join Date: May 2010
Location: Torrington, CT
Posts: 609
|
Re: Custom Banger Header and intakes
Last edited by BCCHOPIT; 10-03-2011 at 04:27 PM. |
10-09-2011, 09:58 PM | #27 |
Senior Member
Join Date: May 2010
Location: Torrington, CT
Posts: 609
|
Re: Custom Banger Header and intakes
spacer kits for alum intake and header
what a twin up draft intake ? flanges available |
10-16-2011, 08:44 PM | #28 |
Senior Member
Join Date: May 2010
Location: Liberty, MO
Posts: 201
|
Re: Custom Banger Header and intakes
Will be installing a chevy ii 4 cylinder from a 1962 chevy have you ever made a header for duals and a intake for a webber or a 97 for one of theses critters thanks
|
10-17-2011, 12:15 AM | #29 |
Member
Join Date: Aug 2011
Location: North of Seattle
Posts: 50
|
Re: Custom Banger Header and intakes
Nice Work !!! I like what you are doing.
Hank |
10-17-2011, 12:17 PM | #30 |
Member
Join Date: May 2010
Posts: 67
|
Re: Custom Banger Header and intakes
I have a riley two port OHV head on my engine and have always been thought the original updrat manifold was cool. Could you fitting or flanges be used to create the manifold shown in the attached picture?
Dave |
10-17-2011, 07:15 PM | #31 | |
Senior Member
Join Date: May 2010
Location: Torrington, CT
Posts: 609
|
Re: Custom Banger Header and intakes
Quote:
Looks like that could be fun to make. Could you Email me the pic [email protected] Bill |
|
10-31-2011, 08:11 PM | #32 |
Member
Join Date: Jul 2010
Location: massillon,ohio
Posts: 84
|
Re: Custom Banger Header and intakes
am doing a "b" 4 banger and want to use the stock exaust and possible blower intake . can you build to my dimensions ? thanks, steve
|
11-06-2011, 02:09 AM | #33 | |
Senior Member
Join Date: May 2010
Location: Torrington, CT
Posts: 609
|
Re: Custom Banger Header and intakes
Quote:
YES I CAN.... I will send you a PM |
|
10-27-2012, 10:11 PM | #34 |
Senior Member
Join Date: May 2010
Location: Torrington, CT
Posts: 609
|
Re: Custom Banger Header and intakes
Two Bangers going head to head on the beach is doesn't get better then this.
|
10-27-2012, 10:22 PM | #35 |
Senior Member
Join Date: May 2010
Location: Torrington, CT
Posts: 609
|
Re: Custom Banger Header and intakes
on the car... |
10-27-2012, 10:27 PM | #36 |
Senior Member
Join Date: May 2010
Location: Torrington, CT
Posts: 609
|
Re: Custom Banger Header and intakes
|
03-23-2013, 03:50 PM | #37 |
Junior Member
Join Date: Sep 2012
Location: Okmulgee Ok
Posts: 1
|
Re: Custom Banger Header and intakes
Great work
|
03-28-2013, 11:57 PM | #38 |
Junior Member
Join Date: Jun 2012
Posts: 2
|
Re: Custom Banger Header and intakes
|
04-11-2013, 08:40 PM | #39 |
Senior Member
Join Date: May 2010
Location: Torrington, CT
Posts: 609
|
Re: Custom Banger Header and intakes
I made some out of steel before so can make them out of SS
|
04-15-2013, 10:21 PM | #40 |
Senior Member
Join Date: May 2010
Location: Torrington, CT
Posts: 609
|
Re: Custom Banger Header and intakes
almost stock.... |
04-21-2013, 05:20 PM | #41 |
Senior Member
Join Date: May 2010
Location: Torrington, CT
Posts: 609
|
Re: Custom Banger Header and intakes
3/8 thick Ex. only |
12-15-2013, 07:34 PM | #42 |
Senior Member
Join Date: May 2010
Location: Torrington, CT
Posts: 609
|
Re: Custom Banger Header and intakes
Get your flanges for Xmas....
|
Sponsored Links (Register now to hide all advertisements) |
|
12-15-2013, 08:06 PM | #43 |
Senior Member
Join Date: May 2010
Location: Torrington, CT
Posts: 609
|
Re: Custom Banger Header and intakes
2013 TROG |
12-15-2013, 08:14 PM | #44 |
Senior Member
Join Date: May 2010
Location: Torrington, CT
Posts: 609
|
Re: Custom Banger Header and intakes
Two WAC Customs intakes racing side by side |
12-16-2013, 11:16 AM | #45 |
Junior Member
Join Date: Mar 2012
Posts: 13
|
Re: Custom Banger Header and intakes
You never answered chiliman. Like him I'd be interested in an intake for a 2.5 aka Iron Duke variant I'm installing in a T. Or, does your silence speak more than words???
__________________
In the year of Our Ford. |
12-16-2013, 01:58 PM | #46 | |
Senior Member
Join Date: May 2010
Location: Torrington, CT
Posts: 609
|
Re: Custom Banger Header and intakes
Sponsored Links (Register now to hide all advertisements)
Quote:
I can make anything ( well almost ) Send gaskets and give a rough size I have to work with. PM or Email [email protected] and I will give you my cell # Thanks Bill |
|
01-28-2019, 02:16 AM | #47 |
Senior Member
Join Date: May 2010
Location: Torrington, CT
Posts: 609
|
Re: Custom Banger Header and intakes
Getting ready to make up a batch of single intakes....
Call or text 86o 459o 399 |
|
|
Sponsored Links (Register now to hide all advertisements) |
|