|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
03-05-2022, 08:36 PM | #1 |
Senior Member
Join Date: May 2010
Location: Nelson. New Zealand
Posts: 2,009
|
Coupe parcel tray
I have two 30-31 coupe parcel trays , One is 6" tall the other 5" tall,also the two end mounting brackets are different, one being taller than the other, This would make the tray hang lower , WHY , What is the difference between a standard one & one for a wind down rear window , These are both the same width, Would a wind down rear parcel tray be narrower ,?? Too accommodate the wind down tray & glass, Can,t work out how to put picture on , Thanks Derek in a nice autumn NZ
|
03-05-2022, 10:11 PM | #2 |
Senior Member
Join Date: May 2010
Location: Napier New Zealand
Posts: 931
|
Re: Coupe parcel tray
The '31 wind down window parcel shelf is narrower and has holes etc for mechanism
__________________
1928 Roadster (CA67) 1931 Deluxe Coupe RHD 1931 Victoria RHD Model A's don't leak oil they just mark their territory. |
Sponsored Links (Register now to hide all advertisements) |
|
03-05-2022, 10:16 PM | #3 |
Senior Member
Join Date: May 2010
Location: Nelson. New Zealand
Posts: 2,009
|
Re: Coupe parcel tray
Justin how much narrower ""like front to back measurement , also how tall is the upstand at the back ? got 3 here , two at %' & one at 6" neither has provision for winder mechanism , also 3rd one has outside mounting tags bent at right angles not vertical ,
|
03-07-2022, 06:14 PM | #4 |
Senior Member
Join Date: May 2010
Location: Nelson. New Zealand
Posts: 2,009
|
Re: Coupe parcel tray
So can no one tell me if the deluxe wind down rear window parcel tray measurements are different from a standard on ? who has one they can just measure the width?? Thanks
|
03-08-2022, 05:20 AM | #5 |
Junior Member
Join Date: Nov 2016
Location: Wainuiomata New Zealand
Posts: 13
|
Re: Coupe parcel tray
Hi Derek, I didn't have a shelf so made one to convert to wind down window without modifying stock window wood depth, so not factory measurements.
Page 57 of ''How to restore your model A '' volume 4 gives some measurements and different shelfs. Apparently there were 2 heights ,6'' or 7 1/2'' below window, 5'', 5 1/2'' and 6'' width at center. |
03-08-2022, 06:55 PM | #6 |
Senior Member
Join Date: May 2010
Location: Nelson. New Zealand
Posts: 2,009
|
Re: Coupe parcel tray
Sponsored Links (Register now to hide all advertisements)
|
03-09-2022, 03:16 AM | #7 |
Junior Member
Join Date: Nov 2016
Location: Wainuiomata New Zealand
Posts: 13
|
Re: Coupe parcel tray
|
03-09-2022, 03:43 PM | #8 |
Senior Member
Join Date: May 2010
Location: Nelson. New Zealand
Posts: 2,009
|
Re: Coupe parcel tray
Ron found the article, Thanks for reference , With out a picture ,or location ,One never knows who they are talking too, Thanks
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|