|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
06-25-2022, 11:59 AM | #1 |
Senior Member
Join Date: Apr 2013
Location: Fairport, NY
Posts: 133
|
Another standard roadster top question!!
Gentlemen: I have enclosed a couple of pictures that show the side links which connect to the back of the top irons. There are pins just to the right of my labels. The pin is about .255/.260" in diameter withe an almost spherical end. The height of the pin is about .300/.310" tall. QUESTION: Do these pins remain in the top when it is being closed?? A friend told me that the pins are to be pulled out when closing the top. Thank You in Advance!!
Joel R. Shaw Fairport, N.Y. |
06-25-2022, 01:55 PM | #2 |
Member
Join Date: Feb 2022
Location: Mill Hall, PA
Posts: 46
|
Re: Another standard roadster top question!!
Yes, the pins have to be pulled out for the top to come all the way down, And I mean simply separated from the second piece they go into.
|
Sponsored Links (Register now to hide all advertisements) |
|
06-26-2022, 02:01 PM | #3 |
Senior Member
Join Date: May 2010
Posts: 667
|
Re: Another standard roadster top question!!
Do you know of someone that makes the top bows for the 30 standard roadster? If not, could you take the measurements of the bows so that i can try to make a set.
Thanks, Jesse |
06-27-2022, 09:24 AM | #4 |
Senior Member
Join Date: Apr 2013
Location: Fairport, NY
Posts: 133
|
Re: Another standard roadster top question!!
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|