01-01-1970, 12:00 AM | #1 |
Guest
Posts: n/a
|
unknown head
I have a twin plug head, which according to the owner had the manufacturers name ground off the top due to racing restriction for non-ford heads. The heads name was written originally across the head at an angle, from corner to corner, with smaller writing in the opposite corners..any ideas of what kind of racing head this is? |
01-01-1970, 12:00 AM | #2 |
Guest
Posts: n/a
|
Re: unknown head
Sponsored Links (Register now to hide all advertisements)
Hi, Sounds like a Multi - Ford head made by Riley, when I look at the hi compression head photos at the Tulsa website. For a link - look at Stan Cummings reply about Waukesha Ricardo heads below. Roger K in Sweden |
Sponsored Links (Register now to hide all advertisements) |
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|