The Ford Barn

gridleak · 11-16-2015, 10:35 AM

Any one have one of these head bolts with the tubing broken off in their junk box?. I am repairing a model s motometer and need the sender that mounts in the head.

Vern · 11-16-2015, 01:00 PM

Check with Ron at Williamson's Instruments, (479) 369-2551.
Good man to deal with, he's repaired a couple of Red Ball Motometers for me in the past.

JohnLaVoy · 11-17-2015, 11:44 AM

The sender that is part of the meter or the stud with the hole in it to receive the sender?

JOHN CT · 11-17-2015, 04:25 PM

Head bolt where I can mount a gauge in to . Do they work? I didn't know that existed where can I perches one?

Brian SATX · 11-17-2015, 10:50 PM

You have to look for the bolt or have a machine shop make one. That is what I had to do. They use hex stock to do it.

gridleak · 11-17-2015, 10:55 PM

Sponsored Links (Register now to hide all advertisements)

yes its a cylinder full of ether that fits inside of an elongated head bolt.

11-16-2015, 01:00 PM	#2
Vern Senior Member Join Date: May 2010 Posts: 572	Re: motometer head bolt Check with Ron at Williamson's Instruments, (479) 369-2551. Good man to deal with, he's repaired a couple of Red Ball Motometers for me in the past.

11-17-2015, 11:44 AM	#3
JohnLaVoy Senior Member Join Date: Jun 2014 Location: Rocklin, CA Posts: 779	Re: motometer head bolt The sender that is part of the meter or the stud with the hole in it to receive the sender?

11-17-2015, 04:25 PM	#4
JOHN CT Senior Member Join Date: May 2010 Location: In my garage Posts: 465	Re: motometer head bolt Head bolt where I can mount a gauge in to . Do they work? I didn't know that existed where can I perches one?

11-17-2015, 10:50 PM	#5
Brian SATX Senior Member Join Date: May 2010 Location: San Antonio, TX Posts: 821	Re: motometer head bolt You have to look for the bolt or have a machine shop make one. That is what I had to do. They use hex stock to do it. __________________ Brian SATX

11-17-2015, 10:55 PM	#6
gridleak Senior Member Join Date: Oct 2010 Location: bozeman mt Posts: 170	Re: motometer head bolt Sponsored Links (Register now to hide all advertisements) yes its a cylinder full of ether that fits inside of an elongated head bolt.