The Ford Barn

3twinridges · 02-15-2023, 03:50 PM

I bought the Centerforce parts today and will report back once I get it built and try it. I test fitted the flywheel dowel pins and flywheel bolts and they just felt too loose. Afraid if I used this flywheel I have it would create problems. I hate to keep buying old flywheels trying to find a good used one when I can just buy new parts.

JB

V8 Bob · 02-15-2023, 04:35 PM

Quote:

Originally Posted by 3twinridges

I bought the Centerforce parts today and will report back once I get it built and try it. I test fitted the flywheel dowel pins and flywheel bolts and they just felt too loose. Afraid if I used this flywheel I have it would create problems. I hate to keep buying old flywheels trying to find a good used one when I can just buy new parts.

JB

The 700360 is a quality flywheel, drilled for both Long and B&B/diaphragm, balanced and weighs about 10 lbs less the a stock iron flywheel.

Krylon32 · 02-15-2023, 05:38 PM

Found the 700360 Centerforce Flywheel on E-Bay for 380.00 with free shipping.

02-15-2023, 03:50 PM	#21
3twinridges Senior Member Join Date: Dec 2015 Posts: 547	Re: Centerforce clutch I bought the Centerforce parts today and will report back once I get it built and try it. I test fitted the flywheel dowel pins and flywheel bolts and they just felt too loose. Afraid if I used this flywheel I have it would create problems. I hate to keep buying old flywheels trying to find a good used one when I can just buy new parts. JB

02-15-2023, 05:38 PM	#23
Krylon32 Senior Member Join Date: May 2010 Posts: 4,484	Re: Centerforce clutch Found the 700360 Centerforce Flywheel on E-Bay for 380.00 with free shipping.