The Ford Barn

uncle buck · 03-21-2021, 11:55 PM

Can someone please post pictures of the inside of a 28 or 29 rpu cab? I have a completely disassembled one that I am trying to assemble. Pictures of any braces, the B pillar with latch striker , and rear cab corners would be much appreciated.

uncle buck · 03-25-2021, 09:06 AM

can anybody help?

BRENT in 10-uh-C · 03-25-2021, 11:23 AM

Quote:

Originally Posted by uncle buck

can anybody help?

I looked for you the other day and was hoping someone else would help you. Unfortunately I don't have much to help you with. The pictures I do have are from a messtoration that we got in that the rear body panel was oil-canning due to the restorer used a grinder to strip the old paint & rust off and over-thinned the metal. We fabricated and added strengthener ribs to the inside to give the body some rigidity again, and correct other issues. Nonetheless, hopefully what I do have can help somewhat. (We also had one other pickup that I did many years ago but I am guessing that was before the digital age when pictures were given to the customer as developed photographs.

)

.

uncle buck · 03-25-2021, 05:34 PM

Thanks Brett. It looks like you have a wood strip in the back corners, is that original? I have these stiffeners

BRENT in 10-uh-C · 03-25-2021, 05:43 PM

Yes, wood in the corners is original. We added metal stiffeners and spot welded it to the inside of the rear panel.

uncle buck · 03-25-2021, 06:02 PM

Sponsored Links (Register now to hide all advertisements)

I just found this wood diagram

uncle buck · 03-25-2021, 06:04 PM

Do these end pieces fit into the corners?

Russ/40 · 03-25-2021, 11:08 PM

uncle buck, I have all the cab photos i took when doing my 29RPU. Lots of assembly details. PM me your email address and I will compress a folder containing all my pics and send them off to you.

McMimmcs · 03-25-2021, 11:49 PM

Quote:

Originally Posted by Russ/40

uncle buck, I have all the cab photos i took when doing my 29RPU. Lots of assembly details. PM me your email address and I will compress a folder containing all my pics and send them off to you.

A very kind and generous offer ! Wayne

uncle buck · 03-26-2021, 08:41 AM

Thank you Russ! PM sent

slatgrille · 03-26-2021, 09:14 AM

I have been following this thread intently since I have a '29 RPU with no back cab parts or pieces. It only has the front cowl/pillar bolted on, so I have no idea what I need for the back part of the cab.

Rather than start a redundant thread on here, would Russ be willing to send me his pics also? This was something I was going to ask about eventually, but since it was already brought up, it would allow me to get started sooner than later in obtaining the necessary components. Any assistance is very much appreciated since I'm new to the Model A world.

Craig

Russ/40 · 03-27-2021, 10:18 AM

Sorry for the delay. Will get pics out today!

Craig, please PM me your email.

uncle buck · 03-28-2021, 01:43 PM

Russ said I can share the pictures. Here are the pictures for anyone else that might need reference.

uncle buck · 03-28-2021, 01:46 PM

More

uncle buck · 03-28-2021, 01:50 PM

Last

29abone · 09-03-2021, 12:27 PM

This is actually pretty helpful to me as well. I just picked up a really solid, complete 29 RPU, although there was some rust issues on the lower cab corners. I was missing most of the wood. This will help identify what i am missing & give me a reason to use my band saw again

03-21-2021, 11:55 PM	#1
uncle buck Senior Member Join Date: May 2010 Location: Snohomish,WA Posts: 1,030	1928 roadster pickup cab assembly pictures Can someone please post pictures of the inside of a 28 or 29 rpu cab? I have a completely disassembled one that I am trying to assemble. Pictures of any braces, the B pillar with latch striker , and rear cab corners would be much appreciated.

03-25-2021, 09:06 AM	#2
uncle buck Senior Member Join Date: May 2010 Location: Snohomish,WA Posts: 1,030	Re: 1928 roadster pickup cab assembly pictures can anybody help?

03-25-2021, 05:43 PM	#5
BRENT in 10-uh-C Senior Member Join Date: May 2010 Location: Eastern Tennessee Posts: 11,508	Re: 1928 roadster pickup cab assembly pictures Yes, wood in the corners is original. We added metal stiffeners and spot welded it to the inside of the rear panel. __________________ . BRENT in 10-uh-C . www.model-a-ford.com ...(...Finally Updated!! ) .

03-25-2021, 06:04 PM	#7
uncle buck Senior Member Join Date: May 2010 Location: Snohomish,WA Posts: 1,030	Re: 1928 roadster pickup cab assembly pictures Do these end pieces fit into the corners?

03-25-2021, 11:08 PM	#8
Russ/40 Senior Member Join Date: May 2010 Location: Santee, California Posts: 3,505	Re: 1928 roadster pickup cab assembly pictures uncle buck, I have all the cab photos i took when doing my 29RPU. Lots of assembly details. PM me your email address and I will compress a folder containing all my pics and send them off to you.

03-26-2021, 08:41 AM	#10
uncle buck Senior Member Join Date: May 2010 Location: Snohomish,WA Posts: 1,030	Re: 1928 roadster pickup cab assembly pictures Thank you Russ! PM sent

03-26-2021, 09:14 AM	#11
slatgrille Senior Member Join Date: Feb 2021 Location: Limerick, ME Posts: 158	Re: 1928 roadster pickup cab assembly pictures I have been following this thread intently since I have a '29 RPU with no back cab parts or pieces. It only has the front cowl/pillar bolted on, so I have no idea what I need for the back part of the cab. Rather than start a redundant thread on here, would Russ be willing to send me his pics also? This was something I was going to ask about eventually, but since it was already brought up, it would allow me to get started sooner than later in obtaining the necessary components. Any assistance is very much appreciated since I'm new to the Model A world. Craig

03-27-2021, 10:18 AM	#12
Russ/40 Senior Member Join Date: May 2010 Location: Santee, California Posts: 3,505	Re: 1928 roadster pickup cab assembly pictures Sorry for the delay. Will get pics out today! Craig, please PM me your email.

09-03-2021, 12:27 PM	#16
29abone Junior Member Join Date: Aug 2013 Location: minneapolis, mn. Posts: 24	Re: 1928 roadster pickup cab assembly pictures This is actually pretty helpful to me as well. I just picked up a really solid, complete 29 RPU, although there was some rust issues on the lower cab corners. I was missing most of the wood. This will help identify what i am missing & give me a reason to use my band saw again

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode