The Ford Barn

flathead47 · 02-08-2016, 09:36 AM

I'm working on my project 36 dash & the glove box door is stuck slightly open. I have removed it from the dash & trying to free it up. It appears the ends of the round hinge bar attached to the door are fixed & should not move. Is the hinge bar a complete assembly that goes thru the dash mounting bracket as one unit or are there 2 separate pieces that slide into each end of the dash mounting bracket. It is a hard assembly to find so do not want to destroy the hinge assembly , just want to free it up.

02-08-2016, 09:36 AM	#1
flathead47 Member Join Date: Dec 2010 Location: Toronto , Ontario Posts: 86	36 glove box I'm working on my project 36 dash & the glove box door is stuck slightly open. I have removed it from the dash & trying to free it up. It appears the ends of the round hinge bar attached to the door are fixed & should not move. Is the hinge bar a complete assembly that goes thru the dash mounting bracket as one unit or are there 2 separate pieces that slide into each end of the dash mounting bracket. It is a hard assembly to find so do not want to destroy the hinge assembly , just want to free it up.