The Ford Barn

Steve Plucker · 12-08-2019, 05:09 PM

Or restored and unmolested in this area of concern...

I would like to know what the attachment hardware is of the Center Floor Pan (commonly referred to as the Rumble Seat Riser) to the right and left Floor Side Sill assemblies.

There should be three (3) attachments on the right side and three (3) attachments on the left side of the Center Floor Pan (Rumble Seat Riser).

These attachments are placed about 8 or so inches apart and are in line with the Rear Body Bolt hole.

There are two choices...Rivets with a "pancake" stamp OR Sheet metal screws.

Please give the year, body style, trunk or rumble seat, and if possible, the Assembly Plant code.

Here is what we got going:

1929....Standard Coupe....trunk....San Fransisco...rivets

Thanks and I hope all have a Very Merry Christmas.

Pluck

12-08-2019, 05:09 PM	#1
Steve Plucker BANNED Join Date: May 2010 Location: Walla Walla, Washington USA Posts: 6,066	Original, unmolested 28-31 Roadsters and Coupes Or restored and unmolested in this area of concern... I would like to know what the attachment hardware is of the Center Floor Pan (commonly referred to as the Rumble Seat Riser) to the right and left Floor Side Sill assemblies. There should be three (3) attachments on the right side and three (3) attachments on the left side of the Center Floor Pan (Rumble Seat Riser). These attachments are placed about 8 or so inches apart and are in line with the Rear Body Bolt hole. There are two choices...Rivets with a "pancake" stamp OR Sheet metal screws. Please give the year, body style, trunk or rumble seat, and if possible, the Assembly Plant code. Here is what we got going: 1929....Standard Coupe....trunk....San Fransisco...rivets Thanks and I hope all have a Very Merry Christmas. Pluck Last edited by Steve Plucker; 12-08-2019 at 06:41 PM.