|
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
![]() |
Thread Tools | Display Modes |
![]() |
#1 |
Member
Join Date: Jan 2021
Posts: 47
|
![]()
Hi,
Started frame off process would like to clean all the heavy grease off under side of engine and also all the frame components including brake area. So many options on degreasers anyone have a good degreaser for major grease. |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Dec 2014
Location: langley, wa.
Posts: 642
|
![]()
Saturate with oven cleaner,give it about 30 min. Rinse w/ water, repeat,
|
![]() |
![]() |
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
#3 |
Senior Member
Join Date: May 2010
Location: Portland, Oregon
Posts: 5,906
|
![]()
There was an industrial steam cleaner in my city when I started the restoration of my Tudor. I took the whole chassis to them and in one day for a very modest charge it came back ready to work on. You might check that out where you are.
__________________
Ray Horton, Portland, OR As you go through life, keep your eye on the donut, not the hole. ![]() |
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: May 2010
Location: Fountain Valley, Calif.
Posts: 937
|
![]()
You also need to be careful where you live. In many residential areas doing any de-greasing and letting it runoff into the street or storm drain is a big no no.
|
![]() |
![]() |
![]() |
#5 |
BANNED
Join Date: May 2010
Location: Walla Walla, Washington USA
Posts: 6,066
|
![]()
I have used Simple Green and Oven cleaner, part washing liquid, and those green scrub pads. If you wan to leave the original black paint, do not leave the part in the Simple Green over 24 hours or the paint will come off.
Pluck |
![]() |
![]() |
![]() |
#6 |
Senior Member
Join Date: May 2010
Location: Eastern Tennessee
Posts: 11,519
|
![]() Sponsored Links (Register now to hide all advertisements)
|
![]() |
![]() |
![]() |
#7 |
Senior Member
Join Date: May 2010
Location: Santee, California
Posts: 3,505
|
![]()
When talking about the age old hard stuff, an array of different scrapers and a lot of elbow grease is the way to start. Eventually progress to petroleum solvents and stiff parts brushes work best for me.
|
![]() |
![]() |
![]() |
#8 |
Senior Member
Join Date: Feb 2011
Location: NNNNNNNNJJJJJJJJJJ
Posts: 6,790
|
![]()
Im thinking oven cleaner and a power washer.............
avoid the elbow grease. |
![]() |
![]() |
![]() |
#9 |
Senior Member
Join Date: May 2010
Location: St Charles , Missouri
Posts: 1,998
|
![]()
I like the cream style (non pumice) like Gogo hand cleaner
It’s white and removes grease and oil and does super on the engine compartments and chassis . You can use it with a soft brush if desired . Do NOT use the ones with grit!!’ Simple greens ok but the gogo is a lot easier on the paint. Buy a small container and give it a try . Larry Shepard |
![]() |
![]() |
![]() |
#10 |
Senior Member
Join Date: May 2010
Location: Wa.
Posts: 5,409
|
![]()
If it is not ok with the establishment washing the stuff down the drain or even washing it off in your dirt driveway, you are doomed to go to a commercial steam cleaning facility.
Remember, the stuff you wash off will really stain a paved driveway or even leave black stain in a dirt one for a year. If you live out in the sticks along a RR track, the RR will be happy to have you dump your goop along the track to keep the weeds down. If you are starting a frame off build, you might consider having the parts acid stripped. You start with bare metal then. All cracks visible or easily detected. |
![]() |
![]() |
![]() |
#11 |
Member
Join Date: Jan 2021
Posts: 47
|
![]()
Thankyou for all the recommendations.
|
![]() |
![]() |
![]() |
|
|
Sponsored Links (Register now to hide all advertisements) |
|