The Ford Barn

Ranchero50 · 12-18-2020, 09:48 AM

Does anyone have prints for these parts? Specifically the threaded parts and the cotter pin location. I picked up some raw castings yesterday and want to machine them to spec.

https://www.brattons.com/28-29-side-...-assembly.html

Thanks in advance,
Jamie

katy · 12-18-2020, 11:02 AM

Sponsored Links (Register now to hide all advertisements)

I can tell you that the nut on the bottom end is the same as the nut that holds the hub onto the rear axle. Don't ask how I know.

12-18-2020, 09:48 AM	#1
Ranchero50 Senior Member Join Date: Aug 2019 Location: Hagerstown MD Posts: 224	Need info on fender mount spare tire bracketry Does anyone have prints for these parts? Specifically the threaded parts and the cotter pin location. I picked up some raw castings yesterday and want to machine them to spec. https://www.brattons.com/28-29-side-...-assembly.html Thanks in advance, Jamie __________________ Building a '29 Speedster, the hard way...

12-18-2020, 11:02 AM	#2
katy Senior Member Join Date: Jun 2015 Location: Red Deer, Alberta Posts: 5,046	Re: Need info on fender mount spare tire bracketry Sponsored Links (Register now to hide all advertisements) I can tell you that the nut on the bottom end is the same as the nut that holds the hub onto the rear axle. Don't ask how I know. __________________ If you don't hear a rumor by 10 AM, start one!. Got my education out behind the barn!