The Ford Barn

Seabees · 12-20-2023, 03:54 PM

Howdy boys, I'm looking for a schematic for the Dana 41 that is in my '48 F1. I've looked hi and low, but can't find one. Plenty of Dana 41's for Jeeps, but nothing for a '48 F1. Where can I find one? Thanks guys, I need a few parts, and I want to make sure I get everything I need. So, I need a schematic.

Dan in MI · 12-20-2023, 04:42 PM

Try Vanpelts web site:

http://www.vanpeltsales.com/FH_web/F...8-52pickup.jpg

FYI, you will get better response on the Early V8 forum.

Gary WA · 12-20-2023, 04:52 PM

Quote:

Originally Posted by Seabees

Howdy boys, I'm looking for a schematic for the Dana 41 that is in my '48 F1. I've looked hi and low, but can't find one. Plenty of Dana 41's for Jeeps, but nothing for a '48 F1. Where can I find one? Thanks guys, I need a few parts, and I want to make sure I get everything I need. So, I need a schematic.

Can't help with that, But I'm Retired Seabee BUC 69-91 always nice to see other Seabees on site. Not many of us!! Good luck.. Can Do!! Did you post on the Early V8 Section?

Bigsnapper43 · 12-20-2023, 07:53 PM

Try looking in a Ford master parts manual 1950 big green book.

rotorwrench · 12-21-2023, 05:46 PM

Sponsored Links (Register now to hide all advertisements)

A lot of the bearing parts interchange with the Dana 44 but the carrier is smaller. The rear cap gasket is a little different due to the shape. The pinion seals vary over the years and some of the ones for the old units are harder to source but they are out there. If they go to pot, just use a later Dana 44 from an F1. Dana 44s were used so long that a lot of parts are still available for them.

12-20-2023, 03:54 PM	#1
Seabees Senior Member Join Date: Jul 2017 Location: Eastern Oregon Posts: 205	Schematic for Dana 41 differential in '48 F1 Howdy boys, I'm looking for a schematic for the Dana 41 that is in my '48 F1. I've looked hi and low, but can't find one. Plenty of Dana 41's for Jeeps, but nothing for a '48 F1. Where can I find one? Thanks guys, I need a few parts, and I want to make sure I get everything I need. So, I need a schematic.

12-20-2023, 04:42 PM	#2
Dan in MI Member Join Date: May 2010 Location: Livonia, MI Posts: 80	Re: Schematic for Dana 41 differential in '48 F1 Try Vanpelts web site: http://www.vanpeltsales.com/FH_web/F...8-52pickup.jpg FYI, you will get better response on the Early V8 forum.

12-20-2023, 07:53 PM	#4
Bigsnapper43 Member Join Date: Feb 2023 Posts: 84	Re: Schematic for Dana 41 differential in '48 F1 Try looking in a Ford master parts manual 1950 big green book.

12-21-2023, 05:46 PM	#5
rotorwrench Senior Member Join Date: Jun 2010 Location: San Antonio, Texas Posts: 16,440	Re: Schematic for Dana 41 differential in '48 F1 Sponsored Links (Register now to hide all advertisements) A lot of the bearing parts interchange with the Dana 44 but the carrier is smaller. The rear cap gasket is a little different due to the shape. The pinion seals vary over the years and some of the ones for the old units are harder to source but they are out there. If they go to pot, just use a later Dana 44 from an F1. Dana 44s were used so long that a lot of parts are still available for them.