Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 04-03-2020, 09:27 PM   #1
falconsprint63
Member
 
Join Date: Oct 2013
Location: Mayberry
Posts: 51
Default 36 wiring routing

Sponsored Links (Register now to hide all advertisements)
Hi all,

I recently picked up a 36 phaeton in the final stages of assembly after a frame off restoration. The PO passed away before finishing. I'm a long time hot rod guy but this one's pretty much stock (added juice brakes and replaced the missing flathead with a 38 model).

Can anyone give me some details on proper routing for the original style wiring harness? Particularly the rear harness and crossover and the front headlight crossover wires? The ignition system is wired and as is the dash. The rear section is pulled down the drivers frame rail. Everything else is just kind of coiled in the engine bay.

Where does the rear crossover run? Across the rear spreader?

Is there a separate crossover harness for the PS headlight and horn or is it part of that coil?


Also can someone post up a pic of how the assembly at the end of the column looks assembled. I think on have the parts but I'm not sure. It doesn't lock into the end of the column

How how/where does that harness get to the hear and tail lights inside the fenders?

Thanks!
falconsprint63 is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 08:30 AM.