The Ford Barn

Charles Brock · 07-21-2018, 01:29 PM

How is a '32 Roadster Seat Back Cushion attached at the bottom to the body?? Thanks

DavidG · 07-21-2018, 03:36 PM

As shown in the photo below.

Charles Brock · 07-21-2018, 03:57 PM

Quote:

Originally Posted by DavidG

As shown in the photo below.

David, where can these 3 brackets, that bolt to the seat frame and body , be purchased? Thanks

DavidG · 07-21-2018, 05:32 PM

As they come with a Brookville body, no doubt they would be one source and there may be others such as Karl Wescott. They are very simple in design and could easily be made from strap steel with common tools; they are L-shaped with a slight slope rearward in the vertical portion.

Charles Brock · 07-21-2018, 07:39 PM

Sponsored Links (Register now to hide all advertisements)

Quote:

Originally Posted by DavidG

As they come with a Brookville body, no doubt they would be one source and there may be others such as Karl Wescott. They are very simple in design and could easily be made from strap steel with common tools; they are L-shaped with a slight slope rearward in the vertical portion.

David, thank you so much for you help.

07-21-2018, 01:29 PM	#1
Charles Brock Senior Member Join Date: May 2010 Location: Rome, GA Posts: 120	'32 Roadster Seat How is a '32 Roadster Seat Back Cushion attached at the bottom to the body?? Thanks

07-21-2018, 05:32 PM	#4
DavidG Senior Member Join Date: May 2010 Location: southeastern Michigan Posts: 10,101	Re: '32 Roadster Seat As they come with a Brookville body, no doubt they would be one source and there may be others such as Karl Wescott. They are very simple in design and could easily be made from strap steel with common tools; they are L-shaped with a slight slope rearward in the vertical portion.