|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
04-01-2019, 10:46 AM | #21 |
Senior Member
Join Date: Feb 2014
Location: Harare Zimbabwe
Posts: 160
|
Re: Right hand drive steering worm advice needed
Hi All,
thanks for all your input. Doing some follow ups from all your info. Hope to sort the problem out soon. Viv |
04-04-2019, 01:06 AM | #22 |
Senior Member
Join Date: Aug 2010
Location: East Boothbay, Maine
Posts: 279
|
Re: Right hand drive steering worm advice needed
These RHD issues can be confusing. I bought a RHD sector from MAC's and it was correct and was good quality. I also bought a drag link rebuild kit which included springs, cups and end screws. The end screws appear to be 1 1/16-18 for the RHD drag link and 1 1/16- 20 for the LHD or US domestic drag link. Why they would be different makes no sense but I thought this information might be useful to others.
|
Sponsored Links (Register now to hide all advertisements) |
|
04-06-2019, 06:35 AM | #23 |
Junior Member
Join Date: Feb 2013
Posts: 16
|
Re: Right hand drive steering worm advice needed
I rebuilt the steering box on our 1941 C11ADF (RHD) military station wagon with a worm supplied by Mac's. It seems to be of good quality and adjusted correctly.
|
04-07-2019, 06:31 PM | #24 |
Junior Member
Join Date: Nov 2010
Posts: 6
|
Re: Right hand drive steering worm advice needed
Yes T Scott. I am just about to undertake RHD steering end rebuild so very helpful.
|
04-10-2019, 09:45 PM | #25 |
Member
Join Date: Nov 2011
Location: Sacto, Ca
Posts: 85
|
Re: Right hand drive steering worm advice needed
best to use a 37-40 steering box, You only have to ever so lightly slot one of the 3 mounting holes and you are in, be sure to use only the 37-40 drop arm . if the column length is an issue , have it professionally shortened,
|
04-11-2019, 03:29 AM | #26 |
Senior Member
Join Date: Dec 2011
Location: Country Victoria Australia
Posts: 130
|
Re: Right hand drive steering worm advice needed
Sponsored Links (Register now to hide all advertisements)
|
04-11-2019, 11:22 AM | #27 |
Senior Member
Join Date: Feb 2014
Location: Harare Zimbabwe
Posts: 160
|
Re: Right hand drive steering worm advice needed
Thanks everyone for your input and advice, I have managed to secure a 36 RHD worm and sector with its bearings from Brian in New Zealand, hopefully it will arrive and sort out my steering problems. Thanks again guys
Viv. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|