The Ford Barn

Glenn Thoreson · 11-07-2018, 12:50 PM

NORS Thompson Bronze rod bearings for '39 - '42 221 Cu. in. engine. Complete set in boxes. Std. OD, .020 ID. - 50.00 plus postage. SOLD
Two sets of head gaskets for the same engine equipped with factory thin wall sleeves. These are a standard bore gasket. The fire ring seats atop the little lip on the sleeves. Not being reproduced that I can determine. Original style steel core gaskets. - 40.00 per set plus postage.
One set of steel head gaskets w/asbestos (?) core. 3 3/16 bore. Can be used on on 221 engines without sleeves that have been bores to .060 oversize or standard bore 59AB
25 bucks and postage.
New intake manifold gasket - 10 bucks plus.

Glenn Thoreson · 11-17-2018, 01:13 PM

Sponsored Links (Register now to hide all advertisements)

Bump...

11-07-2018, 12:50 PM	#1
Glenn Thoreson Senior Member Join Date: May 2010 Posts: 203	59A bearings & gaskets City: Cokeville State: WY Price: varies NORS Thompson Bronze rod bearings for '39 - '42 221 Cu. in. engine. Complete set in boxes. Std. OD, .020 ID. - 50.00 plus postage. SOLD Two sets of head gaskets for the same engine equipped with factory thin wall sleeves. These are a standard bore gasket. The fire ring seats atop the little lip on the sleeves. Not being reproduced that I can determine. Original style steel core gaskets. - 40.00 per set plus postage. One set of steel head gaskets w/asbestos (?) core. 3 3/16 bore. Can be used on on 221 engines without sleeves that have been bores to .060 oversize or standard bore 59AB 25 bucks and postage. New intake manifold gasket - 10 bucks plus. Last edited by Glenn Thoreson; 11-17-2018 at 01:13 PM.

11-17-2018, 01:13 PM	#2
Glenn Thoreson Senior Member Join Date: May 2010 Posts: 203	Re: 59A bearings & gaskets Sponsored Links (Register now to hide all advertisements) Bump...