Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 07-03-2020, 03:01 PM   #1
Will N
Senior Member
 
Will N's Avatar
 
Join Date: Jul 2010
Location: Pennsylvania
Posts: 792
Default Rear backing plate/brake installation Les Andrews instructions

Is it just me, or is it impossible to install the assembled rear brake backing plate onto the axle the way that Les Andrews describes in his red manual? Les calls for installing the parking brake lever before installing the backing plate. I tried for about an hour, and there is no way that I could find to get the parking brake lever and the service brake lever through the fork in the radius rod. I took the parking brake lever off, and it slipped right on.


I should have known better than to follow those directions because in the disassembly instructions, Les calls for removing the parking brake lever while the backing plate is still on the car. Could I have an early edition that Les corrected in later editions?
Will N is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 12:18 PM.