1935 1936 ford hood side trim

[40larry]

Can someone provide me with the measured length and width of the thin hood side trim strips used during 1935 and 1936. I believe that the strips are not the same for both years but not sure. Thanks
40larry

[Willit Stop]

The "spears" on my '36 measure 7/16 X 33 1/2 inches.

[KiWinUS]

Larry my original 36 are 33 7/16”

[Gary Tosel]

The 35 Ford hood trim strips are smaller than for the 36 ford hood strips. You are correct.

[Randy in ca]

I get about 29-5/8" for 1935 trim strips.

[40larry]

Sponsored Links (Register now to hide all advertisements)

Originally Posted by Randy in ca

I get about 29-5/8" for 1935 trim strips.

Thanks to everyone who responded with the answer................
40larry

[40larry]

Originally Posted by Randy in ca

I get about 29-5/8" for 1935 trim strips.

Randy:
The ones I have are 29 and 5/8 inch long and quite thin about 1/4 inch wide. Are these correct for the 1935 ?

[Randy in ca]

Originally Posted by 40larry

Randy:
The ones I have are 29 and 5/8 inch long and quite thin about 1/4 inch wide. Are these correct for the 1935 ?

Sounds like the right ones. Both ends should be tapered/rounded for about the last 1/4" also. Need 4 per side.