The Ford Barn

oldmanandakid · 07-06-2013, 01:06 PM

What are the rear body block dimensions for a late 30 coupe? Mine rattle around like BBs in a tin can(no offense

).

BRENT in 10-uh-C · 07-06-2013, 06:31 PM

Quote:

Originally Posted by oldmanandakid

What are the rear body block dimensions for a late 30 coupe? Mine rattle around like BBs in a tin can(no offense

).

If the rear body blocks is rattling like a can full of BB, why is the body bolt(s) not tights?

oldmanandakid · 07-06-2013, 07:05 PM

Sponsored Links (Register now to hide all advertisements)

Brent- It will not tighten and the trunk-wheel well panel sits on the crossmember. The blocks I have are 14x2x1.5 with a 7/16 x 3 inch hex bolt going through the 2 inch dimension. There is a rectangular 1/8 in metal washer on one side and a 1/4 in leather (fiber?) rectangle on the other.

Something is wrong here but I never discount owner failure.

07-06-2013, 01:06 PM	#1
oldmanandakid Senior Member Join Date: Mar 2012 Location: Southern Nevada Posts: 149	Body Block Dimensions What are the rear body block dimensions for a late 30 coupe? Mine rattle around like BBs in a tin can(no offense).

07-06-2013, 07:05 PM	#3
oldmanandakid Senior Member Join Date: Mar 2012 Location: Southern Nevada Posts: 149	Re: Body Block Dimensions Sponsored Links (Register now to hide all advertisements) Brent- It will not tighten and the trunk-wheel well panel sits on the crossmember. The blocks I have are 14x2x1.5 with a 7/16 x 3 inch hex bolt going through the 2 inch dimension. There is a rectangular 1/8 in metal washer on one side and a 1/4 in leather (fiber?) rectangle on the other. Something is wrong here but I never discount owner failure.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode