07-17-2012, 11:21 AM | #1 |
Senior Member
Join Date: May 2010
Location: South Kingstown, R.I.
Posts: 262
|
Wire looms
Does any one have a source for 8mm wire looms? All I have seen are 7mm.
Thanks, Don |
07-17-2012, 12:19 PM | #2 |
Senior Member
Join Date: May 2010
Location: Tehachapi, CA
Posts: 361
|
Re: Wire looms
Haven't seen any 8mm looms yet.
Vergil
__________________
Bigger fonts to aid in reading |
Sponsored Links (Register now to hide all advertisements) |
|
07-17-2012, 01:23 PM | #3 |
Senior Member
Join Date: May 2010
Location: South Kingstown, R.I.
Posts: 262
|
Re: Wire looms
Thanks Vergil, I'll keep looking.
Don |
07-17-2012, 01:44 PM | #4 |
Senior Member
Join Date: May 2010
Location: Near Rising Sun, Maryland
Posts: 10,858
|
Re: Wire looms
Check with Flathead Jack on his website. I found that many times he has things that the other FH parts suppliers do not carry. However, he does seem to charge somewhat of a premium for his parts, but hey, if he carries things you can't find elsewhere that you really want/need, I would buy from him.
__________________
John "Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein |
07-17-2012, 02:16 PM | #5 |
Senior Member
Join Date: May 2010
Location: South Kingstown, R.I.
Posts: 262
|
Re: Wire looms
Thanks John, I have an old catalog somewhere.
Don |
07-17-2012, 02:47 PM | #6 |
Senior Member
Join Date: Dec 2010
Posts: 696
|
Re: Wire looms
Sponsored Links (Register now to hide all advertisements)
|
07-17-2012, 02:56 PM | #7 | |
Senior Member
Join Date: May 2010
Location: Tehachapi, CA
Posts: 361
|
Re: Wire looms
Quote:
Great looking engine Richard. Vergil
__________________
Bigger fonts to aid in reading |
|
07-17-2012, 03:03 PM | #8 |
Senior Member
Join Date: May 2010
Location: South Kingstown, R.I.
Posts: 262
|
Re: Wire looms
That would be great if you don't mind Richard. It appears that you have them under rather than over which I prefer. Your engine is beautiful by the way.
Thanks, Don |
07-17-2012, 04:28 PM | #9 |
Senior Member
Join Date: May 2010
Location: Wa.
Posts: 5,408
|
Re: Wire looms
Wire looms look cool but they will cut the spark plug current somewhat due to capacitive leakage.
|
07-17-2012, 09:05 PM | #10 | |
Senior Member
Join Date: Dec 2010
Posts: 696
|
Re: Wire looms
Quote:
Thanks for the nice words on the engine. An enormous amount of planning and execution went into it. |
|
07-18-2012, 05:09 AM | #11 |
Senior Member
Join Date: May 2010
Location: Georgia
Posts: 611
|
Re: Wire looms
I used a set I made up like Richard and made them out of stainless tubing
|
07-18-2012, 08:49 AM | #12 |
Senior Member
Join Date: May 2010
Location: South Kingstown, R.I.
Posts: 262
|
Re: Wire looms
Hi Richard, sent you a pm.
Don |
07-18-2012, 07:23 PM | #13 |
Junior Member
Join Date: May 2012
Posts: 16
|
Re: Wire looms
Don , i made a set of wire loom like Richard. I used aluminum tubing and buffedit on a buffing wheel. it came out looking like chrome. I got the tubing from McMaster-Carr.com and the aluminum seperators from performance distributors .com
Don't know if it will help , just passing it along steve |
07-19-2012, 07:37 AM | #14 |
Senior Member
Join Date: May 2010
Location: South Kingstown, R.I.
Posts: 262
|
Re: Wire looms
Thanks Choiceph, I got a material list and good diagrams from Richard in Florida and will try to make my own as you did.
Regards, Don |
|
|
Sponsored Links (Register now to hide all advertisements) |
|