|
|||||||
| Sponsored Links (Register now to hide all advertisements) |
|
|
 |
|
Thread Tools | Display Modes |
02-23-2016, 04:37 PM
|
#1 |
|
Member
Join Date: May 2013
Location: Eau Claire, WI
Posts: 42
|
Steering Box Rebuild
I swear someone posted this info here before.....anyone have a recommendation on a good place to send my 55 Ford steering box for a rebuild? Thanks!!
__________________
If you haven't screwed things up, you haven't done anything at all! 
|
|
|
|
02-23-2016, 05:30 PM
|
#2 |
|
Senior Member
Join Date: Jun 2010
Location: tolland CT
Posts: 773
|
Re: Steering Box Rebuild
I used Lares corporation to rebuild the box in my 56 t-bird...www.larescorp.com 1-800-830-7161
|
|
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
|
02-24-2016, 09:29 AM
|
#3 |
|
Senior Member
Join Date: May 2010
Location: St. Michael, Minnesota
Posts: 1,713
|
Re: Steering Box Rebuild
Lares is good people to deal with.
|
|
|
|
|
02-24-2016, 02:41 PM
|
#4 |
|
Senior Member
Join Date: May 2010
Location: Granite City, Illinois
Posts: 3,008
|
Re: Steering Box Rebuild
I send one to Lares years ago. The rebuild process may have been okay but after I had installed and filled the box with 90wt oil, I found that the box was leaking profusely from a crack at the base of the center tube where it meets with the lower bearing plate. I had to tear it all down again and weld that tube.
Be very careful not to bend this tube during removal or installation. Inspect that area carefully for cracking. |
|
|
|
|
02-25-2016, 09:08 AM
|
#5 |
|
Member
Join Date: May 2013
Location: Eau Claire, WI
Posts: 42
|
Re: Steering Box Rebuild
Sponsored Links (Register now to hide all advertisements)
__________________
If you haven't screwed things up, you haven't done anything at all!
|
|
|
|
|
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
Linear Mode
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
All times are GMT -5. The time now is 05:44 AM.