|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
02-14-2016, 09:06 PM | #1 |
Senior Member
Join Date: Nov 2010
Location: Fairbanks, Alaska
Posts: 767
|
Late '31 Side Bowl Gaskets
I am wondering what others are using for the Late '31 Side Bowl Gaskets.
Observation 1 A-22333 Washer and A-22384 Washer, "Changes incorporated into fuel system in May 1931...". As shown in a sketch on page 50, How to Restore your Model Volumn 1, l presume from the Service Bulletins. Observation #2 Parts Price Price list 1928-1932 show 351524-S and 361456-S described as Plain Fibre Washer. What was the color and composition of the originals? and What are others are using today. Darryl in Fairbanks |
02-14-2016, 09:46 PM | #2 |
Senior Member
Join Date: May 2010
Location: Clinton,WA/Whidbey Island
Posts: 4,104
|
Re: Late '31 Side Bowl Gaskets
Just rebuilt one. The Sidebowl Sediment Housing used Lead washer-one for bolt and one for housing others gaskets were the same as used on the Earlier Zeniths. Had to make my own. But i'm sure there out there.That's what I Know! trying to find info I have it somewhere!
__________________
www.whidbeymodelaclub.com Last edited by Gary WA; 02-15-2016 at 11:07 AM. |
Sponsored Links (Register now to hide all advertisements) |
|
02-16-2016, 09:22 AM | #3 |
Senior Member
Join Date: May 2010
Location: Glendale, AZ
Posts: 2,950
|
Re: Late '31 Side Bowl Gaskets
Gary
Where did you find out that they used Lead washers originally on the side bowl. Thanks |
02-16-2016, 11:55 AM | #4 |
Senior Member
Join Date: May 2010
Location: So Cal
Posts: 8,747
|
Re: Late '31 Side Bowl Gaskets
Found this in the 1932 parts book, I think these are the right gaskets.
351524-S 23/32" (1/16"x1") plain fiber washer 351456-S 1/2" (3/64"x3/4") plain fiber washer Bob |
02-16-2016, 07:33 PM | #5 |
Senior Member
Join Date: May 2010
Location: Clinton,WA/Whidbey Island
Posts: 4,104
|
Re: Late '31 Side Bowl Gaskets
I have an article on the side bowl but with my library of Model A's ? Still looking I'll get back when I locate it for sure.Here's what Bob Found I'm still looking!
__________________
www.whidbeymodelaclub.com Last edited by Gary WA; 02-16-2016 at 07:53 PM. |
02-16-2016, 08:59 PM | #6 |
Senior Member
Join Date: Nov 2010
Location: Fairbanks, Alaska
Posts: 767
|
Re: Late '31 Side Bowl Gaskets
Sponsored Links (Register now to hide all advertisements)
In the back of the 1928-1932 Parts Price List there is a list of the small parts, and the description is as Bob says in his post. I am still wondering the color and composition of the parts listed as 351524-S and 361456-S described as Plain Fibre Washer. A-22333 Washers and A-22384 Washer, as shown on page 560 May 1931 of the Service Bulletins should also be shown in the small parts in the back of the 1931 Parts Price list, and have a description. Unfortunately l do not have a copy of the 1931 Parts List. Also, Gary, which book do you have that shows the Gaskets that you posted? Darryl in Fairbanks |
02-16-2016, 11:08 PM | #7 |
Senior Member
Join Date: May 2010
Location: Clinton,WA/Whidbey Island
Posts: 4,104
|
Re: Late '31 Side Bowl Gaskets
here you go.
__________________
www.whidbeymodelaclub.com |
02-16-2016, 11:11 PM | #8 |
Senior Member
Join Date: May 2010
Location: Clinton,WA/Whidbey Island
Posts: 4,104
|
Re: Late '31 Side Bowl Gaskets
also found in this one:
__________________
www.whidbeymodelaclub.com |
02-16-2016, 11:15 PM | #9 |
Senior Member
Join Date: May 2010
Location: Clinton,WA/Whidbey Island
Posts: 4,104
|
Re: Late '31 Side Bowl Gaskets
washers
__________________
www.whidbeymodelaclub.com |
02-16-2016, 11:50 PM | #10 |
Senior Member
Join Date: May 2010
Location: Clinton,WA/Whidbey Island
Posts: 4,104
|
Re: Late '31 Side Bowl Gaskets
Here's another place.Never bought from them,but they look like a good place for some small Model A parts. They have fibre washers for oil and fuel-Red in color.
__________________
www.whidbeymodelaclub.com |
02-17-2016, 12:08 AM | #11 |
Senior Member
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
|
Re: Late '31 Side Bowl Gaskets
I would just smear a thin coat of sealer on the hard gaskets.
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|