The Ford Barn

AYooperA · 03-29-2023, 07:44 AM

You could try contacting this one in DePere. Right next to GB.

Alwaysamopar74 · 03-31-2023, 10:06 AM

What could be cooler than driving that? I'd be all over it if it was available to me.

Grover 29A · 04-02-2023, 10:28 AM

Is this the tillotson model X carb? First job is gas tank flush, clean the sediment bowl, and rebuild the carb.

1955cj5 · 04-02-2023, 12:08 PM

Yes.

My ccpu came to me with one and I still use it.

There is a small filter available that fits into the fuel shutoff valve, inside the tank. a good addition if you don't already have one.

https://www.brattons.com/FUEL-TANK-F...uctinfo/13280/

.

Grover 29A · 04-03-2023, 08:07 PM

The engine has a rebuilt tag on it, apparently this company was bought out soon after they rebuilt this engine. Anyone else have a Nutt rebuild??

03-31-2023, 10:06 AM	#42
Alwaysamopar74 Junior Member Join Date: Apr 2022 Posts: 18	Re: 29 Pickup for sale What could be cooler than driving that? I'd be all over it if it was available to me.

04-02-2023, 12:08 PM	#44
1955cj5 Senior Member Join Date: Apr 2015 Location: Boise, Idaho Posts: 1,578	Re: 29 Pickup for sale Yes. My ccpu came to me with one and I still use it. There is a small filter available that fits into the fuel shutoff valve, inside the tank. a good addition if you don't already have one. https://www.brattons.com/FUEL-TANK-F...uctinfo/13280/ . __________________ Early '29 CCPU that had a 4-speed, but not any more.......in the family since '62 Last edited by 1955cj5; 04-02-2023 at 12:15 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode