|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
09-09-2010, 09:26 PM | #1 |
Senior Member
Join Date: May 2010
Posts: 157
|
35/36 transmission floor pan cover
I was looking in a reproduction catalog and can not find a 35/36 transmission cover for passenger car. Does any one make them? Chet/Ma.
|
09-09-2010, 09:35 PM | #2 |
Junior Member
Join Date: May 2010
Posts: 12
|
Re: 35/36 transmission floor pan cover
I think they stopped making them a few years ago.
|
Sponsored Links (Register now to hide all advertisements) |
|
09-10-2010, 04:01 AM | #3 |
Senior Member
Join Date: May 2010
Location: West Michigan
Posts: 1,218
|
Re: 35/36 transmission floor pan cover
Chet-
I don't believe the steel ones have been reproduced for a couple of years. However, if you are not too choosy, fiberglass covers are still available from a variety of sources. Incidentally, '35 and '36 cover pans are different due to the relocation of the transmission tower between '35 and '36. They are not interchangeable without doing some "butchering." Tom |
09-10-2010, 05:17 AM | #4 |
Senior Member
Join Date: May 2010
Location: N. Ft. Myers, Fl.
Posts: 502
|
Re: 35/36 transmission floor pan cover
There is one on Ebay - not mine!
|
09-10-2010, 10:07 PM | #5 |
Senior Member
Join Date: May 2010
Posts: 420
|
Re: 35/36 transmission floor pan cover
Sponsored Links (Register now to hide all advertisements)
check with dick spadaro.. he may have some still.. my 36 has a modified 39 cover..from what I can tell..
__________________
Pennsylvania has two seasons. Hershey week, and everything else https://sites.google.com/site/eastcoastwoodies/ |
|
|
Sponsored Links (Register now to hide all advertisements) |
|