The Ford Barn

Bud · 08-30-2017, 11:23 AM

Hi,
Does anyone specialize in restoring Wizard side-bowl carburetors?
Thanks.

Big hammer · 08-30-2017, 11:40 AM

I would contact Renner's, they overhaul other carbs not just Zenith. Google Renners Conrner!
734-428-8424 or e-mail [email protected]

Joop · 08-30-2017, 12:31 PM

Do you have a picture of the carburetor you could post.

Thanks

TinCup · 08-30-2017, 12:33 PM

Quote:

Originally Posted by Bud

Hi,
Does anyone specialize in restoring Wizard side-bowl carburetors?
Thanks.

I restored this one but it was a chore. Joop here on the barn was a big help.

Bud · 08-30-2017, 09:32 PM

I have yet to take any pictures of it. It is complete other than the choke driver. The tag is nice. It has the two bolts broken off in the top flange and these stubs are rusted in solid. It is currently soaking to make these easier to remove. The carb has been off a vehicle so long there were spider webs in the venturi. I think I would like to run it on my town sedan, so would like to have it professionally fixed with new plating, etc. But since this is a Simmons/Wizard I would prefer someone who has done these before do this one. Thanks.

henry's 31 · 08-31-2017, 08:52 PM

Sponsored Links (Register now to hide all advertisements)

How does this carburetor compare to the Zenith?

08-30-2017, 11:23 AM	#1
Bud Senior Member Join Date: May 2010 Location: Ohio Posts: 819	Simmons/Wizard Carburetor Hi, Does anyone specialize in restoring Wizard side-bowl carburetors? Thanks.

08-30-2017, 11:40 AM	#2
Big hammer Senior Member Join Date: Jun 2014 Location: Land of Lincoln Posts: 3,131	Re: Simmons/Wizard Carburetor I would contact Renner's, they overhaul other carbs not just Zenith. Google Renners Conrner! 734-428-8424 or e-mail [email protected] __________________ Don't force it with a little hammer tap, tap, tap get a bigger hammer tap done Last edited by Big hammer; 08-30-2017 at 11:44 AM. Reason: Addition

08-30-2017, 12:31 PM	#3
Joop Senior Member Join Date: May 2010 Location: Glendale, AZ Posts: 2,953	Re: Simmons/Wizard Carburetor Do you have a picture of the carburetor you could post. Thanks

08-30-2017, 09:32 PM	#5
Bud Senior Member Join Date: May 2010 Location: Ohio Posts: 819	Re: Simmons/Wizard Carburetor I have yet to take any pictures of it. It is complete other than the choke driver. The tag is nice. It has the two bolts broken off in the top flange and these stubs are rusted in solid. It is currently soaking to make these easier to remove. The carb has been off a vehicle so long there were spider webs in the venturi. I think I would like to run it on my town sedan, so would like to have it professionally fixed with new plating, etc. But since this is a Simmons/Wizard I would prefer someone who has done these before do this one. Thanks.

08-31-2017, 08:52 PM	#6
henry's 31 Senior Member Join Date: Mar 2014 Location: Columbus(Cataula) Georgia Posts: 849	Re: Simmons/Wizard Carburetor Sponsored Links (Register now to hide all advertisements) How does this carburetor compare to the Zenith? __________________ Henry' s 31