|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
08-17-2016, 04:18 PM | #1 |
Senior Member
Join Date: Dec 2014
Location: Hillsboro IL
Posts: 479
|
Brumfield head gasket
Last spring I put a new head gasket on my engine with the 5.9 Brumfield head. I had the head off searching for a noise that ended up being a metal timing gear. I used the fel pro 7013 as recommended by Larry Brumfield with new studs and nuts and copper spray, and a half tube of radiator sealer. I retorqued the head four times and did not have any leaks, but after the engine and drivetrain have been sitting for about four months waiting on body work, I am getting a weep of coolant down the left side of the engine. Should I retorque the head or replace the gasket again? Will the Best brand gasket work with the Brumfield head and should I use new studs and nuts again? Thanks, Art
|
08-17-2016, 07:26 PM | #2 |
Member
Join Date: May 2010
Location: Kalamazoo, MI
Posts: 80
|
Re: Brumfield head gasket
Sponsored Links (Register now to hide all advertisements)
|
Sponsored Links (Register now to hide all advertisements) |
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|