11-13-2023, 12:52 PM | #1 |
Senior Member
Join Date: Mar 2012
Posts: 123
|
Water pump
I rebuilt my water pump and installed it using the new bolts that are machined to look like the original studs and nuts, doing this I didn’t have to pull the radiator. I have a leak coming from the top left bolt. These studs are threaded all the way to the nut. Is it possible the leak is around the threads?
|
11-13-2023, 01:23 PM | #2 |
Senior Member
Join Date: Jun 2014
Location: Land of Lincoln
Posts: 3,131
|
Re: Water pump
Yes , there a couple of through holes in the head that will leak, drain the coolant remove the look alike studs and seal the threads that go into the head, refill with coolant
__________________
Don't force it with a little hammer tap, tap, tap get a bigger hammer tap done |
Sponsored Links (Register now to hide all advertisements) |
|
11-13-2023, 01:29 PM | #3 |
Senior Member
Join Date: May 2010
Location: N. GA
Posts: 532
|
Re: Water pump
The upper left hole goes into the water jacket...like B H said remove that bolt and seal it...problem solved...
TOB |
11-13-2023, 06:08 PM | #4 |
Junior Member
Join Date: Nov 2023
Location: Northwest Arkansas
Posts: 20
|
Re: Water pump
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|