|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
10-24-2016, 08:04 PM | #1 |
Member
Join Date: Sep 2016
Location: Lake Charles, LA
Posts: 91
|
1928 model a speedometer
Hi, I recently bought a speedometer cable for my 1928 model A and it did not fit. It came with a male connector on one end and a female connector on the other. The connection on the back of the speedometer is male as well as the connection on the transmission. Is there such a cable with female connectors on both ends?
|
10-24-2016, 08:35 PM | #2 |
Senior Member
Join Date: May 2010
Location: Central, IL
Posts: 3,968
|
Re: 1928 model a speedometer
are you sure there isnt a broken off old piece in the back of your speedo?
__________________
1929 Model AA - Need long splash aprons! |
Sponsored Links (Register now to hide all advertisements) |
|
10-24-2016, 09:39 PM | #3 |
Senior Member
Join Date: May 2010
Location: So Cal
Posts: 8,741
|
Re: 1928 model a speedometer
That would be a Northeast speedometer I believe, it's an oddball and I don't think
new cables are available. Bob |
10-25-2016, 02:45 AM | #4 |
Member
Join Date: Sep 2016
Location: Lake Charles, LA
Posts: 91
|
Re: 1928 model a speedometer
Was the Northeast speedometer an oval one?
|
10-25-2016, 02:56 AM | #5 |
Senior Member
|
Re: 1928 model a speedometer
Northeast made both, but yes from December '29 until June 30 it would have been oval.
Up until April 1929 an oval Stewart Warner would have been installed. The cable for the 1928-30 Oval Speedo, speedo end was square, the drive end was keyed and round.
__________________
What's right about America is that although we have a mess of problems, we have great capacity - intellect and resources - to do some thing about them. - Henry Ford II Last edited by Mike V. Florida; 10-25-2016 at 03:11 AM. |
10-25-2016, 07:00 AM | #6 |
Member
Join Date: Sep 2016
Location: Lake Charles, LA
Posts: 91
|
Re: 1928 model a speedometer
Sponsored Links (Register now to hide all advertisements)
|
10-25-2016, 07:32 AM | #7 |
Senior Member
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
|
Re: 1928 model a speedometer
I never heard of such a thing as both ends being female. In fact every cable I know has male fittings on both ends.
|
10-25-2016, 08:17 AM | #8 |
Member
Join Date: Sep 2016
Location: Lake Charles, LA
Posts: 91
|
Re: 1928 model a speedometer
No Sir. The one Mac's Auto Parts sent me had one male end and one female end on the housing. My situation is that I have male threaded ends both at the back of the speedometer as well as where it connects to the gear case on the transmission.
|
10-25-2016, 09:08 AM | #9 |
Senior Member
Join Date: May 2010
Location: Portland, Oregon
Posts: 5,902
|
Re: 1928 model a speedometer
I don't understand your description. You say the speedometer has "A male connector on one end and a female connector on the other". The speedo itself only has one connection point where the cable joins. Are you talking about the cable or the cable housing? I looked at Mac's catalog and the cable and housing they offer is the standard Model A unit. Could you post pix of your speedo and your connection at the u-joint? (Make sure they are jpegs and less than 500k.)
__________________
Ray Horton, Portland, OR As you go through life, keep your eye on the donut, not the hole. Last edited by 700rpm; 10-25-2016 at 09:22 AM. |
10-25-2016, 10:31 AM | #10 |
Senior Member
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
|
Re: 1928 model a speedometer
OK, that's where I was lost also. I thought you were talking about the cable, not the housing.
|
10-25-2016, 08:45 PM | #11 |
Member
Join Date: Sep 2016
Location: Lake Charles, LA
Posts: 91
|
Re: 1928 model a speedometer
So has anyone seen a cable housing with two female connectors for this vehicle?
|
10-25-2016, 09:41 PM | #12 |
Senior Member
Join Date: May 2010
Location: So Cal
Posts: 8,741
|
Re: 1928 model a speedometer
Is this the speedometer you have, notice it does not have a trip meter.
It is fairly rare as they only used it for about 6 months. The cables with both ends female show up on epay once in awhile, you might try papanick see if he has one Leonard Nichols (315) 287-1723. Bob |
10-26-2016, 04:04 AM | #13 |
Member
Join Date: Sep 2016
Location: Lake Charles, LA
Posts: 91
|
Re: 1928 model a speedometer
That looks like the one I have. .
|
10-26-2016, 05:00 AM | #14 |
Senior Member
Join Date: May 2010
Location: Anderson, Texas
Posts: 275
|
Re: 1928 model a speedometer
Delux Speedometer and cable in Denver Colo. can make one
|
10-26-2016, 11:21 AM | #15 |
Senior Member
Join Date: May 2010
Location: So Cal
Posts: 8,741
|
Re: 1928 model a speedometer
What is wrong with your original cable housing? Bert's may have a used housing.
Bob |
10-26-2016, 01:20 PM | #16 |
Senior Member
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
|
Re: 1928 model a speedometer
Here's the 1928-9 housing I bought from Bert's when I stopped there years ago. It has the common male and female ends. I wasn't aware there was another style of speedometer cable housing.
|
10-26-2016, 02:48 PM | #17 |
Member
Join Date: Sep 2016
Location: Lake Charles, LA
Posts: 91
|
Re: 1928 model a speedometer
|
10-26-2016, 02:52 PM | #18 |
Member
Join Date: Sep 2016
Location: Lake Charles, LA
Posts: 91
|
Re: 1928 model a speedometer
That's the one I bought and returned. I have a male thread at the speedometer as well as a male thread at the gear case on the transmission.
|
10-27-2016, 03:21 PM | #19 |
Member
Join Date: Sep 2016
Location: Lake Charles, LA
Posts: 91
|
Re: 1928 model a speedometer
Anybody out there know the kind of housing I am in need of?
|
10-27-2016, 03:29 PM | #20 |
Senior Member
Join Date: May 2010
Location: So Cal
Posts: 8,741
|
Re: 1928 model a speedometer
Actually that speedometer is not correct for a 1928. According to the restoration guidelines it was only used from Dec.1929 to June 1930. It might be easier to get
a Stewart-Warner speedometer. Bob |
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|