|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
08-22-2020, 08:16 PM | #1 |
Senior Member
Join Date: May 2010
Location: Suth'N Maine
Posts: 1,996
|
Radiator frame hole location, 39 peeekup
I am posting these for Ken who was asking which holes to use for mounting his radiator, I never really new the reason for the two different holes but I used the forward holes for my installation.
Maybe the two closer to the motor were for a 60hp or inline flathead six, hope this helps. Scott |
08-22-2020, 08:28 PM | #2 |
Senior Member
Join Date: May 2010
Location: Above the gnat line in Georgia
Posts: 7,009
|
Re: Radiator frame hole location, 39 peeekup
On my 36 frame the hole closest to the firewall was for sedans and the one closest to the front bumper was for pickup truck. Not sure about 39. From yourr photo, maybe the same reason.
__________________
Life is like a roll of toilet paper. The closer to the end, the faster it goes. It is better to be seen, than viewed. "We sleep safe in our beds because rough men stand ready in the night to visit violence on those who would do us harm". |
Sponsored Links (Register now to hide all advertisements) |
|
08-23-2020, 08:29 AM | #3 |
Senior Member
Join Date: May 2010
Location: Beaver Dam, Wisconsin
Posts: 821
|
Re: Radiator frame hole location, 39 peeekup
Lawson has got it right, passenger car versus pickup.
|
08-23-2020, 08:38 AM | #4 |
Senior Member
Join Date: Feb 2017
Location: Dothan, AL
Posts: 325
|
Re: Radiator frame hole location, 39 peeekup
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|