The Ford Barn

Lawrie · 10-04-2021, 01:46 AM

My first big drive today in my 28ccpu.with the new Burtz engine and flywheel, 350 stipe cam .6.2 head 97 carb(from my old engine).
only about 180 miles, but some big long hills on the way to and from.
I,m really impressed with how smooth the engine is, how well it goes and oil pressure 35 running and 19=20 at hot idle after a 1 mile long pull up one hill at full throttle,
this was on a 32C day, water temp 85-90c at the top of the long hill ,other wise sat on 75C.
In a short word, I'm am most impressed and thank those who took the time and effort to get these engines to fruition.
Lawrie

10-04-2021, 01:46 AM	#1
Lawrie Senior Member Join Date: May 2010 Location: Qld, Australia Posts: 4,218	Burtz engine My first big drive today in my 28ccpu.with the new Burtz engine and flywheel, 350 stipe cam .6.2 head 97 carb(from my old engine). only about 180 miles, but some big long hills on the way to and from. I,m really impressed with how smooth the engine is, how well it goes and oil pressure 35 running and 19=20 at hot idle after a 1 mile long pull up one hill at full throttle, this was on a 32C day, water temp 85-90c at the top of the long hill ,other wise sat on 75C. In a short word, I'm am most impressed and thank those who took the time and effort to get these engines to fruition. Lawrie