The Ford Barn

Will D · 12-26-2020, 02:12 PM

Any ideas on the ticking noise? I tried going around with a stethoscope but don't hear the same noise anywhere on the block with the stethoscope on. Only when listening with naked ears.

Compression is relatively even on all cylinders except #2 is a little lower. Both valves appear to be opening and closing properly when looking thru the spark plug hole and turning engine over.

https://youtu.be/sYSIlmGlEoY

https://youtu.be/rqn0H2P7uhY

'46 C59A mostly all stock components from what I know.

12-26-2020, 02:12 PM	#1
Will D Senior Member Join Date: Feb 2020 Location: BC Canada Posts: 573	Ticking noise? Any ideas on the ticking noise? I tried going around with a stethoscope but don't hear the same noise anywhere on the block with the stethoscope on. Only when listening with naked ears. Compression is relatively even on all cylinders except #2 is a little lower. Both valves appear to be opening and closing properly when looking thru the spark plug hole and turning engine over. https://youtu.be/sYSIlmGlEoY https://youtu.be/rqn0H2P7uhY '46 C59A mostly all stock components from what I know.