The Ford Barn

C4engr · 11-14-2012, 12:55 PM

Can I R & R a tranny without putting car on lift? I have the Mitchell Tranny but no access to lift. I can put it on jack stands or whatever....
Any advise would be welcomed.

Roger

160B · 11-14-2012, 01:44 PM

Sponsored Links (Register now to hide all advertisements)

You can remove the transmission without a lift. You can pull the engine or you can put the car on jack stands and remove the rear end. either way is a lot of work but if there is a reason to remove the engine or rear end that will help you make the choice.

11-14-2012, 12:55 PM	#1
C4engr Senior Member Join Date: Nov 2011 Location: San Jose CA Posts: 113	Installing Mitchell Syncro Tranny Can I R & R a tranny without putting car on lift? I have the Mitchell Tranny but no access to lift. I can put it on jack stands or whatever.... Any advise would be welcomed. Roger

11-14-2012, 01:44 PM	#2
160B Senior Member Join Date: Aug 2010 Location: Port Orchard, WA Posts: 1,498	Re: Installing Mitchell Syncro Tranny Sponsored Links (Register now to hide all advertisements) You can remove the transmission without a lift. You can pull the engine or you can put the car on jack stands and remove the rear end. either way is a lot of work but if there is a reason to remove the engine or rear end that will help you make the choice. __________________ 1931 160B & 1931 68B If you don't have time to do it right the 1st time, how do you have time to do it the 2nd time?