|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
03-29-2018, 03:21 PM | #1 |
Senior Member
Join Date: Jun 2010
Location: Polk City, Iowa
Posts: 526
|
Radial Tires Toe In
I hove recently heard that there is to be 0* toe in with Radial tires. I am wondering if some of you with radial experience could clarify this form me. I have set my toe-in at 1\16th as the radial tires are so expensive. THX
__________________
Steve Hanna, Polk City, IA |
03-29-2018, 05:43 PM | #2 |
Senior Member
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
|
Re: Radial Tires Toe In
If it handles well and shows no unusual wear with 1/16" toe in, then I'd leave it.
|
Sponsored Links (Register now to hide all advertisements) |
|
03-29-2018, 10:25 PM | #3 |
Senior Member
Join Date: May 2013
Location: Lake Forest, California
Posts: 239
|
Re: Radial Tires Toe In
I would worry about 0 toe either inducing a bit of instability or causing the steering not to self center
__________________
Experience is a cruel teacher. It gives the exam first, then the lesson. |
03-29-2018, 10:36 PM | #4 |
Senior Member
Join Date: Jun 2010
Location: Polk City, Iowa
Posts: 526
|
Re: Radial Tires Toe In
Sponsored Links (Register now to hide all advertisements)
Also received some good advice and information on another forum.
__________________
Steve Hanna, Polk City, IA |
|
|
Sponsored Links (Register now to hide all advertisements) |
|