The Ford Barn

dick lyons · 07-23-2016, 01:01 PM

how do I put dizzy back in block correctly. I pulled it out with out marking the the rotor position first, now its all screwed up..help!!

V8COOPMAN · 07-23-2016, 01:34 PM

Click on the link below. Read Bubba's post #5. Good info in this link. DD

http://www.fordbarn.com/forum/showthread.php?p=456552

dick lyons · 07-24-2016, 03:45 PM

Sponsored Links (Register now to hide all advertisements)

Thanks coop, I found the pully timing mark and went thru all the other steps. Fired right up. running like never before. All done. Dick.

07-23-2016, 01:01 PM	#1
dick lyons Senior Member Join Date: Jul 2012 Location: middletown, delaware Posts: 109	timeing 8ba how do I put dizzy back in block correctly. I pulled it out with out marking the the rotor position first, now its all screwed up..help!! __________________ MNSHNR

07-23-2016, 01:34 PM	#2
V8COOPMAN Senior Member Join Date: May 2010 Location: East Shore of LAKE HOUSTON Posts: 11,106	Re: timeing 8ba Click on the link below. Read Bubba's post #5. Good info in this link. DD http://www.fordbarn.com/forum/showthread.php?p=456552 __________________ *Click Links Below* __ ▼ *'35-'36 W/8BA & MECHANICAL FAN* *T5 W/TORQUE TUBE*

07-24-2016, 03:45 PM	#3
dick lyons Senior Member Join Date: Jul 2012 Location: middletown, delaware Posts: 109	Re: timeing 8ba Sponsored Links (Register now to hide all advertisements) Thanks coop, I found the pully timing mark and went thru all the other steps. Fired right up. running like never before. All done. Dick. __________________ MNSHNR