Aftermarket part #s steering parts

[russcc]

Anyone have a list of aftermarket parts for '37-56 Ford steering box;
B-3552 upper race/cup, Timken #6 or ?
48-3591 sector seal, CR-11067 or ?
78-3576-A Bushings or ?


Thank you Fordbarners.

[1948F-1Pickup]

Assuming the Timken #6 is a SET6,
you'd be looking at LM67048 and LM67010 in NTN/Bower.
The first number is the cone or rolling element and the second number is the cup or race.
In SKF's product line this is a BR6 or an A-6 would be the Federal Mogul/Moog ID.

The seal numbers are IN GENERAL industry trade numbers. CR, unfortunately marches to their own drum-beat. A CR 11067 shows as a 352560 in Federal Mogul/National & SKF. That same CR # also lists as 50161S in FM/National and SKF.
NTN/Bower/BCA doesn't offer any cross-reference for the CR 11067.

Can't help on the bushings. The corporation I work for only makes bearings......

[Ken/Alabama]

Upper race - Timken 6
Lower Race - Timken 6CE
Bearings - Timken 5BC

[Ron Pilger]

Looking for the 48-3591 steering gear oil seal for the 37 box. I’m not clear if if the CR or Federal- Mogul seals as described in the 2 year old post above are exact replacements. Can anyone confirm? Thanks in advance.

[1948F-1Pickup]

I completely went through the box in my '48 not long ago.
Although not an exhaustive list of everything, here are the
part numbers.....

- 7HC-3524 NOS steering shaft & worm
- 7RC-3575 NOS sector shaft
- Lower bearing race 8A 3553 Timken 6CE
- Lower bearing cone 68 3571-A Timken 5BC
- Upper bearing race B 3552 Timken 6
- Upper bearing cone 68 3571-A Timken 5BC
- Sector shaft bushings NOS 78-3576-A
- Sector shaft seal Timken 240151

I don't have a cross reference that shows Timken's 240151 as being correct
for 48-3591 but if a '37 box is the same as a '48.......

[Ron Pilger]

Sponsored Links (Register now to hide all advertisements)

Thank you, 1948F-1Pickup. Very helpful info for me. Ron